Flight Controllers All In One Fc/esc

Tony

Staff member
Just an FYI, that board doesn't have an ESC or a VTX. You will need those separately. But you could cut and solder the wires from the stack x ESC to the flight controller... Then you will just need a VTX. I'm getting ready to do a review video (when I can stand up for more than 5 minutes at a time...) on another board like that one you posted, but with a VTX built in.
 

Tony

Staff member
I forgot to add as well, that FC has the sensitive gyro. You want to look for one with MPU6000 not 20xxx.
 
Top Bottom