I have some spare Spektrum AR636 receivers on hand and decided to try making a couple foam airplanes over the winter. I'm wanting roughly a 3 to 4 ft wing span so am asking what brushless motor would be good as well as ESC and Servo's. Is there any benefit in digital versus analog servo's too. I prefer Castle creations when possible for ESC since I like their computer interface. Just some general info to point me in the right direction would be a help.
I originally thought I could just use the specs from the aircraft the receivers came out of but even though they are the same size the motor ratings are vastly different, 15A vs 40A. Also, one had analog servos and the other digital so apparently the AR636 doesn't care but that also confuses me because seems I'd have a PWM signal for analog and PPM for digital but it's the same receiver.
I originally thought I could just use the specs from the aircraft the receivers came out of but even though they are the same size the motor ratings are vastly different, 15A vs 40A. Also, one had analog servos and the other digital so apparently the AR636 doesn't care but that also confuses me because seems I'd have a PWM signal for analog and PPM for digital but it's the same receiver.