EyeStation
Well-Known Member
Well my 300x became a donor-copter for the second time. I lost the blades to my brothers SR. So with a bent feathering shaft, 3 bad servo gear sets, a bent main shaft, stripped main gear, and cracked tail box, I felt it was time to transfer the AR7200bx to the 450 and put the Tarot ZYX aside for a bit.
I am worried about my headspeed right now. I have a HobbyKing 450 Series 3400kV motor, Helical gears with an 11T pinion and 121T Main gear.
With this following video, I have a throttle curve of 0-30-50-55-60. Seems like a low curve for the headspeed I am achieving. I will have to wait for my buddy to come over before we can put a tach on it though.
What do you think?
[video=youtube_share;kNBSn8XXwNM]http://youtu.be/kNBSn8XXwNM[/video]
I am worried about my headspeed right now. I have a HobbyKing 450 Series 3400kV motor, Helical gears with an 11T pinion and 121T Main gear.
With this following video, I have a throttle curve of 0-30-50-55-60. Seems like a low curve for the headspeed I am achieving. I will have to wait for my buddy to come over before we can put a tach on it though.
What do you think?
[video=youtube_share;kNBSn8XXwNM]http://youtu.be/kNBSn8XXwNM[/video]