FaisalHeli's
New Member
Hello,
I want to start by letting you guys know that Im using a Dx8 with Trex450L brand new out of the box. 3GX v5.0
I did all the setups as indicated in the manual. When I came to the first hover I had enormous tail wag. Simply, I thought to solve it with gain reduction. Didn't work no matter what value I put on the tx.
After countless hopeless tries. Here is the conclusion:
1. I have 3 Gyro settings that I can cycle through in flight with (Flap/Gyro) switch. Changing through them does change the light on 3gx.
2. I have in "switch selectiom": Gyro= AUX2
3. When connected to 3gx software, no matter what value I put for any of the gyro settings, the Gyro gain is the same, no change what so ever. The values that I see on the computer are 1: (62)/ 2: (03)/ 3: (68)
So why is it when I use the switch, it does toggle through the gyro gains, but whenever I set a value, it doesn't change anything while I can still toggle through them.
All help is appreciated, Thank you for your time
FaisalHeli's
I want to start by letting you guys know that Im using a Dx8 with Trex450L brand new out of the box. 3GX v5.0
I did all the setups as indicated in the manual. When I came to the first hover I had enormous tail wag. Simply, I thought to solve it with gain reduction. Didn't work no matter what value I put on the tx.
After countless hopeless tries. Here is the conclusion:
1. I have 3 Gyro settings that I can cycle through in flight with (Flap/Gyro) switch. Changing through them does change the light on 3gx.
2. I have in "switch selectiom": Gyro= AUX2
3. When connected to 3gx software, no matter what value I put for any of the gyro settings, the Gyro gain is the same, no change what so ever. The values that I see on the computer are 1: (62)/ 2: (03)/ 3: (68)
So why is it when I use the switch, it does toggle through the gyro gains, but whenever I set a value, it doesn't change anything while I can still toggle through them.
All help is appreciated, Thank you for your time
FaisalHeli's