450 Blade 450

[Richyrich]

Hi,

I have just set blade pitch on my blade 450 and being the first time I have every done this I may have missed something. I used the blade leveling tool to level the plate then a pitch guage. The problem is I can achieve zero pitch but only 7 of postive and negative.

Both blades have have a nylon washers under them as the blades are slightly smaller than standard and I was told this is the standard fix.

Any help appreciated.

Richard

 

[Slobberdog]

do you have d/r set in your tx, as this will affect the throw of your servos, also you may need to increase you pitch amount in your swash mix menu

 

[Richyrich]

do you have d/r set in your tx, as this will affect the throw of your servos, also you may need to increase you pitch amount in your swash mix menu

Hi, Im quite new so not quite sure d/r is

 

[Slobberdog]

dual rate, found in your dual rate and expo menu,

also when you set up your blade pitch your pitch curve needs to be linear, (straight line 0-25-50-75-100 for instance) otherwise it wont work properly

 

[Richyrich]

dual rate, found in your dual rate and expo menu,

also when you set up your blade pitch your pitch curve needs to be linear, (straight line 0-25-50-75-100 for instance) otherwise it wont work properly

Thanks, I'll check them in a hour or so.