600 HELP!

[Sion]

Right so im converting my 600n pro to fbl ive got myself a micro beast plus and a 600 dfc head second hand, now i know the dfc shaft was shorter but I didn’t know it dosent fit my heli at all it wont reach the bottom bearing. So my question is what shaft do i need? Will my fb shaft work with the dfc components on? Gutted its happed was hoping to get it all built tonight to fly tomorrow but that screwed now

 

[Admiral]

It appears that Align do make an 600N DFC Shaft looks like they are available through AMAIN Align T-Rex 600N Parts

I have no specs on them though to give you the length.

 

[D.O.G.]

I have no specs on them though to give you the length.

• (2) 600N DFC Main shaft 9x179mm
• (2) Socket collar screw 3x19mm
• (2) M3 nut
• (1) Main shaft spacer (0.3) 10.1x14x0.3mm
• (1) Main shaft spacer (0.5) 10.1x14x0.5mm

 

[fran11784]

I'm wondering why you couldn't just use the original shaft. The three links from the swash to the bellcranks just have to be lengthened.

 

[Smoggie]

You can quite easily cut down the original shaft. I've done this before, they cut and drill reasonably easily.