Articles
After a few members told me about these servos, I hit up Jason over at Banggood to see if I could get my hands on them. He agreed and sent them to me. In the video below, I explain the servos which are already installed in my SE V2. If it could have gone wrong, it did go wrong on this video...
I thought I would go ahead and post this here since we can use this just like the 6 port charger that I reviewed a while back. Except this time, you can charge your stuff in your car instead of having to have AC power. Have a watch. It's a short video.
Click this link to get yours today...
Had this sent to me from Anglink and I have to say, this is going to be a big help in charging multiple packs for the little quads that have USB only chargers. Have a watch and let me know what you think.
AngLink 50W 6 Port Desktop USB Charger Review - YouTube
Banggood sent me a little hex and I had to get it up in the air. Unfortunately, it was quite windy outside today but that didn't stop me from getting this hex in the air.
When you order this hex, you are going to have to install the sticks into the Tx as well as 3 AA batteries. You are also...
Forgot to upload this last night. This is what is being called the worlds smallest hexacopter! and if flies like a larger hex. Very easy to fly, very stable and has a SICK piro rate in high rates. Best of all, it's cheap! Click on the link below to check it out on Banggood's site.
Fayee...
I wasnt sure where to post this, hope it's ok here.....
I recently picked up a 'Hobby Eagle A3 Super II' flight stabiliser. I got it locally but these things are available from a number of places including Banggood for about $27, or a bit more if you want the programming box (highly...
This is the longest it has ever taken to do a review video and I have to say, it was worth the wait. I have read multiple reviews of this quad and I heard everything from it's WiFi on the FPV (which it's NOT) and it doesn't handle ANY wind (which it does). Well, I put it all to the test in the...
It has taken me way too long to get this done, but here it is. And I have to say, this hex is a mean little thing. Watch the video to see it attack me! Friggin thing hahaha.
WLtoys Q272 Hexacopter Drone Product Review - YouTube
I was pretty excited to get this balancer in the mail. I have been wanting one like this for quite some time now. But never wanted to drop the coinage on it. Now that I have used it, I'm kicking myself for waiting! This balancer can do just about anything from props, to entire helicopter heads...
If you are looking to get into any hobby, most likely you are going to look for some good deals on used products. In this video, I show you what you are more than likely going to get.
I purchased both of these trucks for a really good deal and I couldn't pass it up. Such a good deal as a...
In this video, I show you how to completely tear down the engine out of your Traxxas T-Maxx. This is not as hard as some would like you to think. We start by pulling the engine out of the truck, followed by removing the ez start then removing the backplate, sleeve, piston & rod and crank after...
In this video, I finally got all of my parts in for the new engine including a new engine block since my last one was broke. I also show you how to get rid of light rust on the crank from sitting. Remember, the fuel these use is made up of mainly methanol, and methanol absorbs water, then the...
In this video, I show you how to properly tear down and rebuild all 8 of the shocks on a Traxxas T-Maxx. Once you are done rebuilding your shocks, your truck will ride better than ever!
As always, if you have any questions, comments or suggestions, post them in the comment section below.
In this video, we take a complete truck, and tear it down into it's individual components. From removing the shock towers to removing the transmission, it is all coming off of the chassis!
As always, if you have any questions, comments or suggestions, post them below in the comments section.
In this video, we tear into the front and rear diff's (differentials) to completely clean them, rebuild them and get them ready for some ground pounding action. As you can see in the video below, these are some of the worst gears I have ever seen. I never thought grease could get this hard...
In this video, I tear into the transmission to show you what to look for when going through your truck.
As always, if you have any questions, comments or suggestions, post them in the comment section below.
We have completely torn down this truck and cleaned it from front to back, top to bottom and now it's time to put it all back together in all its monster truck glory!
As always, if you have any questions, comments or suggestions, post them below in the comments section.
In this video, I finally get the T-Maxx running again the way it should and we take it out for a little test drive.
As always, if you have any questions, comments or suggestions, post them in the comments below!
In this video, I walk you through how to completely set up the suspension on the Traxxas T-Maxx. I show you how to adjust the camber as well as how to modify an RPM Camber Gauge so you can use it on large tires. I also show you how to use an RPM Toe In Gauge to set the toe-in on the front and...
February 1st, 2013 was the last time the RCH Heli, AKA Murphy, the Align 600 Nitro, was put into a public video. Well today, that changes!
In this video, I catch you up on what has went on with the bird, why it has set so long and what we are planning to do with it in the future.
If you...