1. If you would like to get rid of these banners and the ads within the posts, all you have to do is sign up and they will go away!
  2. Welcome to Rc-Help, are you here looking for the PDF Plans? They are located in the store in the tab above, but you must be signed in to access that part of the site. It only takes a second to sign up!
  3. Like Us On Facebook!
    Hello Guest, it occurred to us during that last server failure that we had no way of informing the members of the site of the failure and I would like to invite you to like us on facebook so that you can get updates if the site happens to go down again. We don't post much over there unless we are updating the members so we will not flood your feed like some places do. Just click on Like and then allow notifications and that's it. See you there soon!

    Click Here To Rc-Help's Facebook page!
    Dismiss Notice
Dismiss Notice
Hey Guest, I see you are not signed up on our forum yet. Did you know Registration is FREE and is only a couple clicks away? You can even sign in from Facebook, Twitter or Google+ for your convenience! So what are you waiting for, CLICK HERE to join in on the conversation!

Transmitter How To

You can view the page at [URL]http://rc-help.com/content.php?193-DX6i-How-To-Part-1-Introduction[/URL]
Hey everyone. There is information out there about D/R and Expo that is just flat out WRONG! I know a few that call themselves "Guru's" that have it totally wrong. Well, I want to help make it right. In the video below, you will hear, and see me explain how D/R and Expo work, and why you should use it. I draw out, and explain how positive (+) and negative Expo affect the servos, and why you don't want to use negative in the Spektrum DX6i. I'm sure other Transmitters are like this one, but I...
Over time, I have had a lot of people ask me to make a full guide for the DX6i. Well here it is. This is a guide that goes from start to finish on setting up a helicopter. Once you know the basics of the DX6i, it will get much easier to work with it, and start playing around with it. In this guide, I will cover everything from setting up the radio, throttle & pitch curves that I use, installing the Rx, setting up the links, installing and setting up the gyro and tail servo, and finally...
Hello everyone. If there is one questions or suggestion that I get asked more than anything else, it's "can you make a "how to" video that covers everything from start to finish?". Well, that is exactly what I have done. This series is going to show you exactly what to do to setup your DX6i, set all your swash, pitch, throttle curves, gyro settings, end point's, and everything else in the radio. Then, I'm going to show you exactly how to bind the Tx to the Rx. Then, setup all fo the...
Hello everyone. If there is one questions or suggestion that I get asked more than anything else, it's "can you make a "how to" video that covers everything from start to finish?". Well, that is exactly what I have done. This series is going to show you exactly what to do to setup your DX6i, set all your swash, pitch, throttle curves, gyro settings, end point's, and everything else in the radio. Then, I'm going to show you exactly how to bind the Tx to the Rx. Then, setup all fo the...
Hello everyone. If there is one questions or suggestion that I get asked more than anything else, it's "can you make a "how to" video that covers everything from start to finish?". Well, that is exactly what I have done. This series is going to show you exactly what to do to setup your DX6i, set all your swash, pitch, throttle curves, gyro settings, end point's, and everything else in the radio. Then, I'm going to show you exactly how to bind the Tx to the Rx. Then, setup all fo the...
Hello everyone. If there is one questions or suggestion that I get asked more than anything else, it's "can you make a "how to" video that covers everything from start to finish?". Well, that is exactly what I have done. This series is going to show you exactly what to do to setup your DX6i, set all your swash, pitch, throttle curves, gyro settings, end point's, and everything else in the radio. Then, I'm going to show you exactly how to bind the Tx to the Rx. Then, setup all fo the...
Hello everyone. If there is one questions or suggestion that I get asked more than anything else, it's "can you make a "how to" video that covers everything from start to finish?". Well, that is exactly what I have done. This series is going to show you exactly what to do to setup your DX6i, set all your swash, pitch, throttle curves, gyro settings, end point's, and everything else in the radio. Then, I'm going to show you exactly how to bind the Tx to the Rx. Then, setup all fo the...
Here is part 1 of the DX6i How-To series. This is just a basic introduction to the radio.
This is part 2 of the DX6i How to series. Menu Basics
In this section, you will find the first videos that I made on the DX6i. There are only 4 videos, as I thought no one was watching them lol. It turns out they were quite popular, so I ended up doing another series on them. But, I thought I would go ahead and post these up since people are still asking for them. Just click on the little blue icon on the left to see all of the video links.
Here is Part 3 of the DX6i How-To Series. In this video we cover the switches, dual rates, expo, and what revo mixing is.
Here is Part 4 of the How-To series. This is the final part, and I cover binding to the Rx, Swash settings, Throttle and pitch curves.
So you are ready to move up from your DX6i, and you went out and purchased a brand new DX7s/DX8. Now you look at it and wonder what all can be done with it. That is where this playlist will come in handy. As time goes on, I will be adding more and more to the playlist, so make sure to check back often to see if I have added anything. As always, if you have questions, post them below and we will help you out. <iframe width="640" height="360"...
Since I purchased my DX8, the one question I have been asked the most is "what is the Raw Input Test Menu?". Well in the video below I explain what it is. I don't however know what the code is on the bottom left although I'm sure it's a diagnostic code of some sort or maybe that is the code that is going to the Rx so it knows what switch has been flipped. If you know for a FACT what this code is, post below and let me know. Hope you enjoy :popcorn:
Loading...