1. If you would like to get rid of these banners and the ads within the posts, all you have to do is sign up and they will go away!
  2. Welcome to Rc-Help, are you here looking for the PDF Plans? They are located in the store in the tab above, but you must be signed in to access that part of the site. It only takes a second to sign up!
  3. Like Us On Facebook!
    Hello Guest, it occurred to us during that last server failure that we had no way of informing the members of the site of the failure and I would like to invite you to like us on facebook so that you can get updates if the site happens to go down again. We don't post much over there unless we are updating the members so we will not flood your feed like some places do. Just click on Like and then allow notifications and that's it. See you there soon!

    Click Here To Rc-Help's Facebook page!
    Dismiss Notice
Dismiss Notice
Hey Guest, I see you are not signed up on our forum yet. Did you know Registration is FREE and is only a couple clicks away? You can even sign in from Facebook, Twitter or Google+ for your convenience! So what are you waiting for, CLICK HERE to join in on the conversation!

Spektrum / JR

I had a Subscriber on YouTube ask me how you adjust the stick tension on the DX9 and instead of just typing out a reply, I decided to make a quick little video on how to adjust your stick tension. Hope this helps someone out that was worried about tearing up their transmitter right after they purchased it lol.
In this video, I walk you through how to set up a basic airplane in the DX9. As always, if you have any questions, all you have to do is post below and we will help you out. [MEDIA=youtube]CcwGAS4xekk[/MEDIA]
For all of you new DX9 owners out there, as well as those that are looking into getting the DX9, here is the video on how to set up the Tx with basic Helicopter parameters. This video will walk you through the basics of getting that new bird up in the air. As always, if you have any questions, comments or suggestions, please post them up! We would love to read them!
If there is one thing unique about computer transmitters, it's the ability to make them your own with your name, your backlight intensity, contrast and so on. In this video, I walk you through how to do just that as well as show you how to calibrate your sticks. [MEDIA=youtube]v6fdQeLlLr0[/MEDIA]
One of the first things you need to do with your new DX9 is update the firmware. If you don't, when you turn it on, and when you shut it off, it will give you a message telling you to register your DX9 and update the firmware. In this video, I show you step by step exactly how to do that.
Since selling off my DX8, I had to invest in a better Tx that will take me further into the future with this hobby, and the DX9 Black Edition was just the ticket!
This section has been moved into the How To section from just being in teh articles section. On the left side, after you clicked on the How To link, you will notice that there are now more links just below it all with blue "+" signs to the left of them. If you click on those + signs, it will open up the content that is within each section. You can also, instead of clicking on the blue sign, you can click on teh link to see the information within that section. at this time, not all...
So you are ready to move up from your DX6i, and you went out and purchased a brand new DX7s/DX8. Now you look at it and wonder what all can be done with it. That is where this playlist will come in handy. As time goes on, I will be adding more and more to the playlist, so make sure to check back often to see if I have added anything. As always, if you have questions, post them below and we will help you out. <iframe width="640" height="360"...
For those of you with small hands, heres a little tip.
In this video, I explain what some of you have thought to be a bad DX8 or a DX8 that's going bad. In all reality, it's just a channel setting that's causing all of the issues. Hope this helps someone out there before they call Horizon or Spektrum. [MEDIA=youtube]bJ3u3GCcp80[/MEDIA]
In this video, I give you a look inside the Spektrum DX8. Some people need a visual look at what they are doing to get a better understanding of what's going on in there. There is no need to take the Tx apart when doing any adjusting of the sticks or modes, but this will help you better understand what is going on rather than just looking through small holes. [MEDIA=youtube]bWobptDQ3FU[/MEDIA]
In this video, I'm going to show you one of the easiest things you can do to the DX8 to make it your own. Unlike the DX6i, the DX8 has holes in the case ready to adjust the sticks. Have a watch and let me know what you think. [MEDIA=youtube]aPdx7Z9aVUM[/MEDIA]
Alright everyone, I'm finally getting on with the DX8 videos. It's a slow process, but we are getting there. In this video, I show you how to change your DX8 from Mode 2 which I use, to Mode 1 which is used in other countries. You may be asking, why in the world would I need to know this, I will just buy one in my own country that is already setup. Well because, if you can find a great deal on this DX8, but it's across the pond and in a different mode, you can easily change the mode and...
When you get your new DX8, you will want to setup a model in it. If you are flying helicopters, this is the video for you. In this video we are in the System Setup menu and we go through all of the screens to set the basics up for a CCPM helicopter. From name and type, to switch select and trim steps. Have a watch and let me know what you think. [MEDIA=youtube]pAaxzlQvWmw[/MEDIA]
Finally, we are going to start setting up the model memory in the DX8. In this video I walk you through setting up the model type, wing type, name and everything else needed to create a new Airplane model. If you have any questions, please click on the link above and sign up on the forum. We are always happy to help