1. If you would like to get rid of these banners and the ads within the posts, all you have to do is sign up and they will go away!
  2. Hey Guest, are you here looking for the PDF Plans? They are located in the store in the tab above, but you must be signed in to access that part of the site. It only takes a second to sign up!
Hey Guest, I see you are not signed up on our forum yet. Did you know Registration is FREE and is only a couple clicks away? You can even sign in from Facebook, Twitter or Google+ for your convenience! So what are you waiting for, CLICK HERE to join in on the conversation!

DX6i

This section has been moved into the How To section from just being in teh articles section. On the left side, after you clicked on the How To link, you will notice that there are now more links just below it all with blue "+" signs to the left of them. If you click on those + signs, it will open up the content that is within each section. You can also, instead of clicking on the blue sign, you can click on teh link to see the information within that section. at this time, not all...
Hello everyone. If there is one questions or suggestion that I get asked more than anything else, it's "can you make a "how to" video that covers everything from start to finish?". Well, that is exactly what I have done. This series is going to show you exactly what to do to setup your DX6i, set all your swash, pitch, throttle curves, gyro settings, end point's, and everything else in the radio. Then, I'm going to show you exactly how to bind the Tx to the Rx. Then, setup all fo the...
Hello everyone. If there is one questions or suggestion that I get asked more than anything else, it's "can you make a "how to" video that covers everything from start to finish?". Well, that is exactly what I have done. This series is going to show you exactly what to do to setup your DX6i, set all your swash, pitch, throttle curves, gyro settings, end point's, and everything else in the radio. Then, I'm going to show you exactly how to bind the Tx to the Rx. Then, setup all fo the...
Hello everyone. If there is one questions or suggestion that I get asked more than anything else, it's "can you make a "how to" video that covers everything from start to finish?". Well, that is exactly what I have done. This series is going to show you exactly what to do to setup your DX6i, set all your swash, pitch, throttle curves, gyro settings, end point's, and everything else in the radio. Then, I'm going to show you exactly how to bind the Tx to the Rx. Then, setup all fo the...
Hello everyone. If there is one questions or suggestion that I get asked more than anything else, it's "can you make a "how to" video that covers everything from start to finish?". Well, that is exactly what I have done. This series is going to show you exactly what to do to setup your DX6i, set all your swash, pitch, throttle curves, gyro settings, end point's, and everything else in the radio. Then, I'm going to show you exactly how to bind the Tx to the Rx. Then, setup all fo the...
Hello everyone. If there is one questions or suggestion that I get asked more than anything else, it's "can you make a "how to" video that covers everything from start to finish?". Well, that is exactly what I have done. This series is going to show you exactly what to do to setup your DX6i, set all your swash, pitch, throttle curves, gyro settings, end point's, and everything else in the radio. Then, I'm going to show you exactly how to bind the Tx to the Rx. Then, setup all fo the...
Over time, I have had a lot of people ask me to make a full guide for the DX6i. Well here it is. This is a guide that goes from start to finish on setting up a helicopter. Once you know the basics of the DX6i, it will get much easier to work with it, and start playing around with it. In this guide, I will cover everything from setting up the radio, throttle & pitch curves that I use, installing the Rx, setting up the links, installing and setting up the gyro and tail servo, and finally...
Here is Part 4 of the How-To series. This is the final part, and I cover binding to the Rx, Swash settings, Throttle and pitch curves.
Here is Part 3 of the DX6i How-To Series. In this video we cover the switches, dual rates, expo, and what revo mixing is.
This is part 2 of the DX6i How to series. Menu Basics
You can view the page at [URL]http://rc-help.com/content.php?193-DX6i-How-To-Part-1-Introduction[/URL]
Here is part 1 of the DX6i How-To series. This is just a basic introduction to the radio.
In this section, you will find the first videos that I made on the DX6i. There are only 4 videos, as I thought no one was watching them lol. It turns out they were quite popular, so I ended up doing another series on them. But, I thought I would go ahead and post these up since people are still asking for them. Just click on the little blue icon on the left to see all of the video links.
Loading...