FRANK REYNOLDS
New Member
I HAVE A YAK 54 3D WITH DX8 TRANSMITTER AND CANT FIND SETUP IT ONLY OPERATES IN FULL MODE AS3X NOT WORKING CAN ANYONE HELP. I HAVE TO HAVE THE AS3X WORKING FOR THE GRAND KIDS
i always type caps in emails the grand kids are lincensed and fly with the big boys but are not 3d experts although they are on the simulaterOk... first let's address the elephant in the room ( so to speak... )... Please don't post in all CAPS ... that is called yelling and generally considered rude in forums and other areas of the internet... it's also harder to read.
A Yak 54 or any other 3D model is not a beginners airplane... even if you do have an As3x receiver in it... It is an advanced pilot's airplane and takes a lot of experience to actually fly one without crashing it often. In fact... if it says 3D, I'd recommend not letting a new flyer start with it... it's a good way to discourage a new flyer. There are plenty of good trainers out there to start with... save the 3D stuff for later after the pilot is experienced.
I'm really not familiar with the As3x ... but I believe I read that it has 3 modes and you assign a channel to it in order to change from regular, assisted and 3D modes.... but I'd refer you back to the instructions to verify that.
they have flown the timber 1.2 mustang p51 apprentice super cub avistari always type caps in emails the grand kids are lincensed and fly with the big boys but are not 3d experts although they are on the simulater