Ok...I got my package in the mail today. Thank you DAL2855 for the super fast shipping! That was great! You said that you were sending a Hobbywing ESC Programming Card along with the 40amp ESC. I didn't know that you were sending me a Programming Card that was still sealed in the original package. Very cool! Thank you! As far as the 40amp ESC....well....it is a 40amp ESC but I'd like to make a suggestion. Don't sell electronic equipment that has the rubber insulation worn away from the wires and exposing the wires. This ESC has exposed wires in 2 places. One of the places looks to be burnt. Maybe it wasn't burnt but it sure does look like it. Also..on the wires that would connect to the motor, it looks like the wire tips were too long and the wire wasn't soldered into the connectors very well. More exposed wires.
Now...please keep this in mind...I'm not complaining. You said that you'd send me a 40amp ESC and Programming Card. You did just that. So, thank you! I am going to cut away the heat shrink and remove all the wires from the ESC and I'll solder all new wires and I'll live happily ever after.
In the future, just be careful what you are selling. Someone else may not take something like this as easy as I am.