Misc Turnigy H.A.L. Frame

[WyDiablo]

I was given this frame by a friend but I have not been able to find good motors. It weighs 983 Grams without electronics so it will be a heavy copter. I have read that some use 480Kv to 1200Kv motors but I"m not sure how good they work. It will swing a 14" props and also a 15" prop but that's cutting it real close. Maybe you guys have some thoughts.

Update: Sorry guys but after adding the weight of parts going on this frame I game it back to my friend. WWAAayyy too heavy to get off the ground without really big motors.

 

[Admiral]

I'd start with the recommended gear should fly OK

Requires:
28-XX or 35-XX brushless outrunner motor x 4
18~30A brushless ESC x 4
8x4~10x4.7 propeller x 4 (2 standard/2 reverse rotation)
Multi-rotor control board
2200~3000mAh 11.1V lipoly
4CH Transmitter & Receiver

 

[WyDiablo]

Thanks admiral but I"m thinking its got way too much weight for me to deal with.