Powerdyne
New Member
I very recently built a TSA Infusion 600e Pro.
It's a very nice heli, and for the price, it's a great foray into the 600 sized birds. Quality is top notch, and it flies like a dream. There is one small downside to it, and that is the plastic blade grips on the main rotor. They tend to allow the blade grip bolts to bend easily because they flex a little in flight. Nothing that spending $60 on some metal blade grips can't fix though!
Specs:
TSA Infusion 600E Pro
Scorpion HKIII-4035-560Kv
Castle Creations Phoenix Ice2 120A HV
Castle Creations BEC Pro
Spartan Vortex VX1e
Futaba R7008SB in 12ch FASSTest Mode B (Sbus)
VCTRC DS715MG Cyclic (Prototype)
ProTek 230S Tail Servo
KBDD Extreme Edition 620mm Main blades
KBDD Extreme Edition 96mm Tail blades
Batteries used: 2x Voltz Thor 6s 5000mAh 45C, 2x Pulse Ultra 6s 5000mAh 65C
Head Speeds: Normal - 2,100 RPM, IDU1 - 2,250 RPM, IDU3 - 2,350 RPM
Maiden flight video: (Camera guy didn't know how to work the camera)
https://youtu.be/1YsG2gQflLI
It's a very nice heli, and for the price, it's a great foray into the 600 sized birds. Quality is top notch, and it flies like a dream. There is one small downside to it, and that is the plastic blade grips on the main rotor. They tend to allow the blade grip bolts to bend easily because they flex a little in flight. Nothing that spending $60 on some metal blade grips can't fix though!
Specs:
TSA Infusion 600E Pro
Scorpion HKIII-4035-560Kv
Castle Creations Phoenix Ice2 120A HV
Castle Creations BEC Pro
Spartan Vortex VX1e
Futaba R7008SB in 12ch FASSTest Mode B (Sbus)
VCTRC DS715MG Cyclic (Prototype)
ProTek 230S Tail Servo
KBDD Extreme Edition 620mm Main blades
KBDD Extreme Edition 96mm Tail blades
Batteries used: 2x Voltz Thor 6s 5000mAh 45C, 2x Pulse Ultra 6s 5000mAh 65C
Head Speeds: Normal - 2,100 RPM, IDU1 - 2,250 RPM, IDU3 - 2,350 RPM
Maiden flight video: (Camera guy didn't know how to work the camera)
https://youtu.be/1YsG2gQflLI
