Quad Tarot 250 mini build

WyDiablo

Member
Well so far the soldering pads really stink. They are very small and really close together. After soldering on the esc's I plugged a battery in and got a very tiny spark or what I thought was a spark. So I re-soldered the esc that I thought the spark came from and also the one across from it as well. I just hope I have not fried an esc.
 

EyeStation

Well-Known Member
Probably just took out a strand that was not caught with solder. Kinda acted like a fuse. At my age, even soldering Deans plugs is a challenge. I do not envy your task.
 

WyDiablo

Member
That's what I was thinking also. But I could only get one motor to spin. So I removed the esc's and connected them up one at a time and got all 4 to work. Probably scrap the Tarot frame for right now. I have a pdb but its to big so I might just runs some bullet connectors from the battery connection and plug the esc's into them.
 
Last edited:
Top Bottom