450 Tail spin

[AceFlyer]

Hi all, I have set up my kds 450qs and dx6i as per Tony's video's, the problem I have now is the tail spinning as soon as helicopter starts to lift.
Can anyone please help.

 

[Geena]

Check the direction of your rudder to make sure that left is left and right is right. Then check to make sure that your tail gyro is correcting in the correct direction. These are the usual causes for the tail to spin like that on takeoff. Also make sure that the tail gyro is heading hold, and not rate mode.

 

[AceFlyer]

Hi Geena.
Very Sorry for delay, not been a good time.
Your advice has helped a lot, the rudder was wrong way also found that gyro was not working very well charged to different one and all OK. Just need time now to get trimmed better.
Thank you for your help.

 

[Geena]

Hi Geena.
Very Sorry for delay, not been a good time.
Your advice has helped a lot, the rudder was wrong way also found that gyro was not working very well charged to different one and all OK. Just need time now to get trimmed better.
Thank you for your help.

You`re quite welcome, and I`m happy that you were able to get it sorted.