1. If you would like to get rid of these banners and the ads within the posts, all you have to do is sign up and they will go away!
  2. Welcome to Rc-Help, are you here looking for the PDF Plans? They are located in the store in the tab above, but you must be signed in to access that part of the site. It only takes a second to sign up!
  3. Like Us On Facebook!
    Hello Guest, it occurred to us during that last server failure that we had no way of informing the members of the site of the failure and I would like to invite you to like us on facebook so that you can get updates if the site happens to go down again. We don't post much over there unless we are updating the members so we will not flood your feed like some places do. Just click on Like and then allow notifications and that's it. See you there soon!

    Click Here To Rc-Help's Facebook page!
    Dismiss Notice
Dismiss Notice
Hey Guest, I see you are not signed up on our forum yet. Did you know Registration is FREE and is only a couple clicks away? You can even sign in from Facebook, Twitter or Google+ for your convenience! So what are you waiting for, CLICK HERE to join in on the conversation!

FBL Gyro Spektrum Dx6

Discussion in 'Helicopters' started by nicolaschanton, May 29, 2019.

< Brushless Motor Losing Power? | Tail Servo Question >
  1. nicolaschanton

    nicolaschanton New Member

    Joined:
    May 29, 2019
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Gender:
    Male
    Location:
    Switzerland
    Hey Guys
    I want to finish my goblin fireball. However, I have the following problem with the remote control (Spektrumdx6):
    If I move the left joystick upwards (gas) then the Roll and Nick channel also move on the servo monitor. I already have the mixers OFF but I do not know how to continue. Is it on the remote control or at the Bavarian Demon 3x (FBL)? Pleas help me!
     
  2. nicolaschanton

    nicolaschanton New Member

    Joined:
    May 29, 2019
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Gender:
    Male
    Location:
    Switzerland
    No, these are permanentmagnets - maybe after manymany years.
     
  3. Tony

    Tony Administrator Staff Member

    Joined:
    Feb 21, 2011
    Messages:
    36,756
    Likes Received:
    1,423
    Trophy Points:
    113
    I have absolutely no idea what you are saying here..... Please explain...

    As for the Tx, on a collective pitch helicopter, even in 1 Servo 90ยบ or "Normal", when you move the collective ("gas" as you call it), it is going to move the aileron, pitch (which I think you spelled as "Nick") AND elevator. This is just the way Collective Pitch works. It's a "Collective" group of servos working together to move a swash plate to make a helicopter do what it does. Hope this helps.
     
< Brushless Motor Losing Power? | Tail Servo Question >

Share This Page