Scale Setting up for a scale heli with a Spectrum DX18

[MKP777]

This is my first scale heli. I have the 3D types with 2 blade rotor heads.
However they are mostly HH purchases. They come pretty much setup.

This is my first heli that I am setting up from scratch.

I chose 120 degree, 3 servo swash system.
Now, do I have to enter in the mixes? Or does the DX18 do that for me?
(This is only going to be for scale flight so I don't need a lot of negative pitch for this heli)


I plan to use a Spectrum AR9020 9 Channel rcvr. I only need 7 channels with this bird, the 7th is for the Naza but I wanted to have extra for lights.
I will be using the Naza H gyro system.

Thanks so much for any help,

Mike

 

[Tony]

Read over the Naza and find out what swash settings they call for. I'm pretty sure it's Normal or 1 servo, not 120 3 servo.

 

[trainrider06]

hI Mike, that NAZA can sometimes be a little quarky so be careful with it.....have read a few reports about it and a buddy of mine had one on his heli, and the thing just all the sudden decided to not work..

 

[MKP777]

That sounds very scary!