450 pitch setup with align 450 motor

[waghari]

Hi, I have bought and installed new motor for align trex 450.Motor also, align brand.
Read manual and its say hover pitch should be 0 to 5 degree, throttle 50,65,75,85,100
and for idle 2 it should +11 to -11.
My question is i have setup +11 to -11 pitch but how can i set up 0 to 5 pitch on hover
with spektrum dx6i.
Any body have idea most welcome.
thanks

 

[Tony]

I have never heard of settings like that. If you set your throttle as you have above, you will be at 50% throttle as soon as you plug in the heli, not good. If that is the Pitch settings, then I would lower it to 45, 47.5, 50, 75, 100. Your throttle settings should start out at 0, 45, 65, 85, 100. This will give you a little more head speed when hovering and you can lower the 100 down to 85 to keep the speed down when doing pitch pumps or the like.

The 11º is perfect and don't worry about the 5º IMO.

 

[waghari]

ok thanks tony
I will go like you said