ESC moter hesitating when giving throttle

[Badluck]

dose any one know why my moter hesitate and jurks back and fourth be for it gose to full throttle only when the moter is at a stop.cloud it be the esc not set up right? I nerd some help with this thanks. ..

 

[heli-maniac]

Well if you can tell us what it is so we can help you

 

[Tony]

Let us know what motor you are using, what ESC and if you have governor mode turned on or not.

 

[Lee]

It could be timing problem or it could be a bad connection somewhere. But we need more information to help properly.

 

[Badluck]

Hey guys, what's going on is when the moter is at a stop and I give it some throttle it starts to twitch and jurk back and fourth for a few seconds,then it take off and runs fine as long it is running no hesitation, it only dose it from a dead stop.

 

[Lee]

I would check all electrical connections as I said. You could have a bad solder joint somewhere.

 

[Badluck]

By the way the moter is A2212 1000kv and ecs is A FMT 30 amp

 

[Badluck]

well I checked all the soder jonts and they all look good and solid thanks for the advice on that I going to get an new esc and see if that changes any thing.....

 

[Graham Lawrie]

It might be that the ESC is not set up correctly