Latest Build

grumpy1

Active Member
  • Latest build...pinwheel 60.turnigy 4250 500 kv castle creations 75 amp esc 5s 3300 13x8 prop
 

Attachments

  • 20180922_132858.jpg
    20180922_132858.jpg
    349.6 KB · Views: 5
  • 20180922_134008.jpg
    20180922_134008.jpg
    396.6 KB · Views: 5
  • 20180922_133815.jpg
    20180922_133815.jpg
    410.5 KB · Views: 5

grumpy1

Active Member
Thanks..best fit up kit I've ever built. You had to be careful to inventory parts..all lazer cut kit,just handling parts would fall out of sheet, clean cut lines with normal clean-up. Plane has nav lights,landing light,and wingtip strobes
 

Tony

Staff member
That is an awesome looking plane. I second wanting to see some video of this plane in action!
 

grumpy1

Active Member
I used to fly but due to some health problems I can't fly only more...man..my friend flys my planes...good pilot.even before I really enjoyed building...not an ARF guy at ALL..check out this hatch...no screws...no magnets...it's electric with it's own power supply.....pins on each corner...like deadbolt lock..2 9gr servo....2slipo ..voltage reg...sparkfun servo switch...2 panel mounted mini slide switch...1 switch to power on/off....1 switch to lock/unlock..what ya think
 

Attachments

  • 20180922_134216.jpg
    20180922_134216.jpg
    217.9 KB · Views: 3
  • 20180922_135358.jpg
    20180922_135358.jpg
    195.6 KB · Views: 3
  • 20180922_135541.jpg
    20180922_135541.jpg
    210 KB · Views: 3

grumpy1

Active Member
Hatch..make sense now ,still needs battery...vr....servo switch
 

Attachments

  • 20180513_214650.jpg
    20180513_214650.jpg
    211.6 KB · Views: 3

Tony

Staff member
That is awesome! I would still use magnets, but many props to those who still do this! This awesome!
 
Top Bottom