i need a complete set-up for my dx6i and my 120 sr

[kenneth]

Howdy ,I just bought a dx6i and a sr 120 heli. I went on line and saw a few set ups but im not sure which ones to try.Someplace told me to set it to acro mode,others had me setting up mix 1 and 2 and swash, pitch and and.Can someone tell me how to reset this Dx6i and properly set it up?Also the mixing stuff.So what i need is how to reset my mix 1 and 2 and set them correctly,or how to reset my entire heli set up and put in usable numbers for my normal and flight mode.Is there a correct video that covers the entire set-up? Thanks, Ken

 

[Lee]

These are not my settings but what i have found on the internet hope it helps. I don't have a 120SR but the setting seem good from my knowledge of other helis.
D/R Expo
AILE 0 100% +20
ELEV 0 100% +20
RUDD 0 100% +20
Now flip all ypur switches to the "1" position...
AIEL 1 100% +15
ELEV 1 100% +15
RUDD 1 100% +15

TRAVEL ADJUST...all 100%

SUB TRIM ...all 0

RATE SW-GYRO
0:<100.0%
1: 0.0%

THROTTLE CURVE
NORM POS L 0.0%
POS 2 43.0%
POS 3 51.5%
POS 4 80.0%
POS H 100.0%
STUNT POS L 0.0%
POS 2 40.0%
POS 3 60.0%
POS 4 80.0%
POS H 100.0%

HOLD - 0.0%

PITCH CURVE ...not used its a FP heli!

SWASH MIX INH

MIX 1 INH

MIX 2 INH

REVO MIX all 0%

SET UP LIST:
MODEL TYPE HELI

REVERSE all N

SWASH TYPE 1 servo 90*

THRO CUT position INH

D/R COMBI D/R switch: INH

That should get you going.