General Help with Hobby King BAD BUG, WHEELS & TIRES

[RCFashBashandCrashJUNO]

HI, hope I am putting this in the right place now let me know if I am wrong again. I chatted with HK and they did not know.

I want to go off-road/mud/trail riding, TIRES & RIMS for my HK Bad Bug was Nitro circus you get more parts with Nitro Circus.
It is 1/16th scale RC and it is fast!!! Any ways this is what I found so far:


1st Specs:
Specs:
Length:325mm
Width:234mm
Height:160mm
Wheelbase:188mm
Ground clearance:52mm (adjustable)
Battery area:100mm x 18mm x 35mm
Motor size:2838 Brushless Inrunner
Motor:2800KV
ESC:35A
Servo:High Torque Metal Gear Steering Servo
Drive Train:Full-Time 4WD, twin differential
Internal Gear Ratio:5.58:1
Included:
1/16th scale Basher mini monster truck - Bad Bug
2.4ghz digital radio system

2nd
Features:
• Slipper clutch in the transmission and tougher transmission gears
• Stronger and longerdog bonesand outdrives
• Powerful 2800KV brushlessinrunnermotor (water resistant)
• 35A brushless ESC w/ reverse (water resistant)
• Metal gear high-torque steering servo (water resistant)
•Full time4WD
• Sealed front and rear differentials
• Alloy motormountplate
• Heavy dutydriveshafts
• Hardened metaldrivecups
• Full ball bearings
• Oil filled, threaded shock absorbers
• Adjustable toe-in and toe-out
• Adjustable camber and castor
• Independent wishbone suspension
• Front and rear metal suspension arm holder
• Pre-installed wheelie bar
• Extra alloy shock for wheelie support

NOW YHE HELP PLEASE!
Tire Set (L & R) (1 Set) - Basher 1/16 Mini SKU: 9249000954-0

Blade Count:
N/A
Diameter X(Inch):
No
SKU
9249000954-0
Watt Hour
0.00
Weight(g):
154.00
Length:
180.00
Width
50.00
Height
90.00

I would like Black Wheels pre-mounted ones. Any manufacturer just something that looks right and has aggressive tread and good quality! Set of 4.

Down the line I will get the Basher 1/16 4WD Mini Monster Truck V2 - HellSeeker (RTR)
SKU: 9249001251-0

I do have a micrometer if I need to meausher what you need to see, just tell me how.

 

[Tony]

Unfortunately there is no info on what we need to know in order to suggest wheels and tires. If you would, take your wheels off the truck (just one will do unless they are different from front to back) and measure the hex that the wheel sits on. Once you have the size of the hex, then you can look at the wheels and tires that you want and as long as the hex matches (you may have to contact the vendor to verify) then you have the wheels and tires you need.