General heli problem

[eric]

i put a new rx flysky r6b in my e-razor 250 and binded it to the heli and everything works exept it won't spool up it just sets there and beeps can anyone help
thanks eric

 

[murankar]

Did you program the throttle travel in the esc? Sounds like it's not programed.

 

[eric]

not sure how to

 

[murankar]

turn on transmitter, move the throttle to the max position, plug battery to esc, wait for a series of beep, then slide throttle to minimum position, wait for a series of beeps. That should be it. I would look in the documentation for your esc and see what is says exactly. Setup may very from one manufacturer to another.

On mine I had to reverse the throttle before I was able to set the throttle end point.

 

[eric]

thanks for the help murankar that worked

 

[murankar]

Your welcome.