Spektrum DX6i Beast X idol 0 and 1....3?

[trainrider06]

ok I have really not had much chance to do much with my 500 since adding the AR7200BX onto it and getting her airborne. Really just got 2 hover rounds and a little scoot forward back while checking her out.
Then weather and time grounded me..
My question is which switch sets up to default for idol 0 and 1?
My settings are controlled by the BeastX....
Also is it possible to get the 3rd switch from the DX6i or do I need a better radio?
I assume the idol switches are set by default as they are normally??
Rodney

 

[Tony]

You will need to go into your throttle curve menu and set your different throttle curves in there. Once that is done, your F-Mode switch (on the left side top) is what you will use to switch between the settings.

 

[trainrider06]

Any suggestions on curves?

 

[Tony]

Set position 0 to 0 45 65 65 65

Set Position 1 to 85 85 85 85 85

 

[trainrider06]

Set position 0 to 0 45 65 65 65

Set Position 1 to 85 85 85 85 85

As always! Thank you!

- - - Updated - - -

Oh will I need to change anything in the beast? Guessing not...

 

[Tony]

With those settings, you don't need to change anything in the BX.