1. If you would like to get rid of these banners and the ads within the posts, all you have to do is sign up and they will go away!
  2. Welcome to Rc-Help, are you here looking for the PDF Plans? They are located in the store in the tab above, but you must be signed in to access that part of the site. It only takes a second to sign up!
  3. Like Us On Facebook!
    Hello Guest, it occurred to us during that last server failure that we had no way of informing the members of the site of the failure and I would like to invite you to like us on facebook so that you can get updates if the site happens to go down again. We don't post much over there unless we are updating the members so we will not flood your feed like some places do. Just click on Like and then allow notifications and that's it. See you there soon!

    Click Here To Rc-Help's Facebook page!
    Dismiss Notice
Dismiss Notice
Hey Guest, I see you are not signed up on our forum yet. Did you know Registration is FREE and is only a couple clicks away? You can even sign in from Facebook, Twitter or Google+ for your convenience! So what are you waiting for, CLICK HERE to join in on the conversation!

General Cleaning Carb Gunk

Discussion in 'Airplanes' started by bigone5500, Jun 23, 2018.

< Paint For Epo Foam | Arkbird Autopilot System W-osd V3.1028 >
  1. bigone5500

    bigone5500 Well-Known Member

    Joined:
    Mar 22, 2017
    Messages:
    2,592
    Likes Received:
    68
    Trophy Points:
    58
    Location:
    Louisiana
    I took my thunder tiger pro .46 apart and got the bulk of it cleaned out. I took the carb off and am having trouble with the throttle. I can't get it to move or come out. It's stuck very good. How can I dissolve the 'glue'?
     
  2. bigone5500

    bigone5500 Well-Known Member

    Joined:
    Mar 22, 2017
    Messages:
    2,592
    Likes Received:
    68
    Trophy Points:
    58
    Location:
    Louisiana
    Well I figured it out. I ran some hot water over it for about a minute and was able to get the carb apart.
     
  3. Tony

    Tony Administrator Staff Member

    Joined:
    Feb 21, 2011
    Messages:
    36,763
    Likes Received:
    1,423
    Trophy Points:
    113
    I was going to say to soak it in carb cleaner lol.
     
< Paint For Epo Foam | Arkbird Autopilot System W-osd V3.1028 >

Share This Page