450 Binding Problem

[Larkin]

Trying to bind a 3gx connected to a usmile redcon satelite receiver, with a spectrum dx7s. can get remote to blink, then cut off like it should, but when I disconnect from power, and power back up, I get no constant lite from receiver, which tells me it is binded. tried everything, any Ideas? this is on a 450 heli thanks

 

[Tony]

Make sure it is plugged into channel 2 of the Rx and not channel 1.

 

[Steve Kent]

does anybody know the web address to download flight settings of Blade 300 cfx onto sd card to upload onto DX6 transmitter

 

[Tony]

Page 4 in the manual has the settings. Then you can follow my videos on the AR7200BX to setup the gyro on the helicopter.

Manual - https://www.horizonhobby.com/pdf/BLH4650-Manual_EN.pdf

Gyro Setup - AR7200BX Gyro | Rc-Help Forum

You may have a locked gyro though so not all functions will be available like they are on my gyros.

 

[Admiral]

The Spektrum DX6 Gen2 SPM files for the Blade 300CFX & others which I downloaded from DX6 6 Channel System w/ AR610 Receiver (SPM6700): Spektrum - The Leader in Spread Spectrum Technology