Bear's toys

[rc-bear]

Bear's Toys

First of all, my land vehicles are controlled by a Airtronics MT4 and batteries are turnigy nanotechs.

All one vehicles run full size lipo expect for F113 and B4.1 which runs shorty size lipos.

Car number 1
3 racing zero, this car started its life as a zero s and got upgraded to zero spec with carbon and aluminium all over the place

Electrics are-
Airtronics 92524 3-Channel receiver.
Savox sc1251mg metal gear servo
Hobbywing justock esc
Speed passion v3 21.5 turn motor

Car number 2
Sakura zero s
Stock roller still deciding on what to do with it LOL

Car number 3
Tamiya m06 rear wheel drive
Airtronics 92524 3-Channel receiver
Savox sc1251mg metal gear servo
Hobbywing 35a esc
13 turn hobbywing motor

Car number 4
Tamiya m05 front wheel drive
Airtronics 92524 3-Channel receiver
Savox sc1251mg metal gear servo servo
Hobbywing 35a esc
13 turn hobbywing motor

Car number 5
Turnigy go kart
Airtronics 92524 3-Channel receiver
Stock motor
Stock servo
Turnigy 35a esc

Car number 6
3racing F113
Airtronics 92524 3-Channel receiver
Savox sc1251mg metal gear servo
Hobbywing justock esc
Reedy Mach 2 21.5 turn motor
Shorty lipo

Car number 7
Team associated sc10 2wd short course truck
Airtronics 92524 3-Channel receiver
Savox 1258 titanium gear servo
Hobbywing 90a esc
Speed passion 10.5 turn motor

Car number 8
Tamiya tt01e
Airtronics 92524 3-Channel receiver
Generic servo
Turnigy 35a esc
Turnigy 13 turn motor

Car number 9
Being built up
Team associated t4.1 stadium truck 2wd
Electrics will be the same as the sc10

Car number 10
Collecting parts for build
Team associated b4.1 buggy 2wd
Reedy Mach 2 17.5 turn motor
Esc will be hobbywing justock
Servo will be savox 1258tg titanium gear
Receiver will be Airtronics 92524 3-Channel

Car number 11
Losi micro rock crawler
Airtronics 92524 3-Channel receiver
Stock metal gear servo
Hobbywing rock crawler 35a esc
Hobbywing micro 18 turn motor

Car number 12
Team associated 12r5.1 with inline battery conversion
Currently going through a rebuild
Airtronics 92524 3-Channel receiver
Savox 1250mg metal gear servo
Motor will be reedy Mach 2
Esc will be either hobbywing or viper, thou will most probably be hobbywing LOL

As you can see I favor savox servos and hobbywing esc and the turnigy esc I use are clones of the hobbywing esc

Air toys

Number 1
Stock walkera lady bird

Number 2
Stock blade mcx

Number 3
SK450 quad
Only a frame at the moment
Still deciding on electrics
Battery will be zippy or turnigy nano tech
Esc will be either hobbywing or turnigy multistar
Control board will be KK2.0
Radio is most likely be airtronics
Camera is still to be researched
Motor is still to be researched

Pictures will hopefully be up tonight.

 

[rc-bear]

pictures are number according to discriptions above, i have only taken pictures of rollers or running cars once the other cars are built i will put pictures up cause at the moment there are a pile of parts.

car number 1


car number 2 thats what car number looked like at the start when i got it.


car number 3


car number 4


car number 5


car number 6


car number 7


car number 8


car number 11


car number 12


any questions feel free to ask.

 

[Sparse]

hye bear car three and for look almost vintage, are they? if not the wheels and tries look it to on them two pics. either way nice collection, drift cars correct.

 

[Derek]

This is a great collection!!! I don't know much about rc land vehicles but they sure are fun to watch. Maybe you can share some video of them running around.

 

[Lee]

You've got some garage there. Lets see the bodies on them.

 

[rc-bear]

hye bear car three and for look almost vintage, are they? if not the wheels and tries look it to on them two pics. either way nice collection, drift cars correct.

Hi sparse,

Car 3 is the current tamiya mini rear wheel drive and car 4 is the current tamiya front wheel drive car.

Bothe are quite fun to drive and have differing characteristics and have exactly the same gear ratio.

- - - Updated - - -

This is a great collection!!! I don't know much about rc land vehicles but they sure are fun to watch. Maybe you can share some video of them running around.

Thanx Derek, I have no video of yet but will be getting a cam in the near future as that is something I have always wanted to do.

- - - Updated - - -

​

You've got some garage there. Lets see the bodies on them.

Thanx Lee, and it's still growing still want a 1/8th offroad buggy or truck and there will be a boat in the near future.

I will take a shoot with the bodies ASAP and put them up in here.

- - - Updated - - -

​

You've got some garage there. Lets see the bodies on them.

Thanx Lee, and it's still growing still want a 1/8th offroad buggy or truck and there will be a boat in the near future.

I will take a shoot with the bodies ASAP and put them up in here.

 

[Sparse]

i have my pic of my 1/8 losi buggy

- - - Updated - - -

my buggy is all hopped up hi tech servos, enduro race tires, werks b6-pro engine, 2058 werks tuned pipe, losi flex tuned chassis. the whole nine i have not raced in awhlie since i started to fly. but its there if I want to go to the local track and get some air and stuff with it.

 

[rc-bear]

That looks nice sparse, I am only electric at the moment.

But I do want to go gas later on in 1/5th scale but want current projects to be done first.

Thou it will be slow cause I dropped a good bit of money on a FMA PL6 charger and a icharger 206b, so recover bank account time then hit it again LOL

 

[Sparse]

well when you do decide to buy, go wit x-ray, tamiya, kyosho. all the have electrict buggies i dont want to se you buy junk take it out hit a jump wrong and break stuff. get a good quality car and it will last you. if you need and help with the car venture let me know, I have been doing r/c cars hardcore for years. needed something new and got a t rex.