450 Align 450L missing servo head screws?

[Angelworks]

I'm almost done with this kit, and I went to fasten the servo hats on, but the screws seem to be missing. Anyone else run into this with this kit?

 

[Tony]

Are you talking about the screws that hold the servo arms onto the servo output splines? If so, I believe those are M3 thread, about 5mm, maybe 4mm long. But no, every super combo that I have gotten has had them in the kit.

 

[Angelworks]

The manual says they are m2 x 4mm - to attach the D4AF servo horn.

The only other screws that have that kind of thread are the ones that mount the servos themselves - just to check I didn't put a screw (or three) in the wrong place I backed all of them out and they are too long.

I'll probably drop by the hobby shop I got the kit from to see if they have any spares .

 

[Tony]

M2, wow. Didn't realize they were that small...

 

[Lee]

They normally come in the packet with the servo horns.
Some one else had the same problem last week with the tail servo horn screw missing too.