Misc 650MM Hexacopter

[WyDiablo]

I have 2 frames like this one
http://www.hobbyking.com/hobbyking/...r_Frame_with_Tall_Crab_Landing_Gear_KIT_.html
And I was thinking about using these motors with 30Amp esc's.
Rctimer 2830-850KV (cut shaft) Brushless Motor For Multi-Rotor

I think they might work ok with that frame any other suggestions?

 

[WyDiablo]

Ok guys this is what I have in mind for the HK 650 hexacopter. I"m going to replace the 10.812 length arms with 15.750 long arms. I"m thinking about using these motors and these esc's running this frame on a (1) or (2) 4S 5000Mah batteries in parallel. The only electronic will be vtx and rx along with a 420TVL camera. And I will use the landing gear list here. Guessing that my AUW will be close to 3000 grams and will be about 900MM hexacopter . If you guys see anything that might not work let me know.
HK Frame: HobbyKing 650X6 Folding HexaCopter Frame with Tall Crab Landing Gear (KIT)
(6) HK Sq. Arms : Aluminum Square Tube DIY Multi-Rotor 15x15x400mm (black)
(1) HK Landing Gear: Multifunction Care-Free High Crab FPV Landing Gear Set (Black)
(6) Sunnsky 580Kv motors: SunnySky X3508S KV580 Brushless Motor - SunnySky X Series - SunnySky Motor - Motor - Power System

 

[SIXFOOTER]

Looks like a fun build

 

[WyDiablo]

It was but a friend that was looking for a hexacopter for himself made me an offer that I could not refuse lololol. $$$.$$