FBL Gyro 3GX + 2 sats, going scale

B

billmester

New Member
Hi,

I have built a Trex 450 Pro DFC 3GX, with 2 sats. It is hovering beautifully, very stable and calm.
Now, I want to put this whole setup into a scale fuse.
1. What do I need to set to compensate for the extra weight? I need only a stable hover, no 3D stuff...
2. Any chance I get a "free channel" out of the 3GX somehow? To control lights, retracts, etc... or is the only solution using a separate RX and scrapping the sats?

thanks,
bm
 
Tony

Tony

Staff member
The only way you can get extra channels is to use an AR7200 or AR8000 Rx and set it up that way. As for the extra weight, just add more collective. That should be all that you have to do. However, once you fly it a few times, you can play around with the pitch settings to get it flying the way you want.
 
You must log in or register to reply here.
Top Bottom