Search results

Yes, I do have the old Dx6i. Not too keen though about switching parts if I' m gonna go after the seller for a full refund, but if you have an idea that may work for me-if the seller does not ive me a full refund, I'm all ears.

Just received a used Dx6i from ebay (screen quit on my 1st gen. old DX6i). This. Tx. looks just slightly used; now comes the "good part" : yesterday, I entered all of my old settings (ccpm etc) into this new/ used Tx and then bound it to my receiver (AR6100) . As soon as it binded, all the...

Your recommendation for a home built flybar locking tool is just what I have built this am; used a 3/4" wide x 3/16 thick piece of lexan and two screws with locking nuts. Once my flybar is licked in level, I can now use my digital pitch gauge. So far, it all works together very well. Thanks for...

Thank you for your helpful input, I am hovering with a trex 450Se at 65% speed of the “real time” setting after that I simply can ‘t react fast enough to keep the sim- heli in a controlled hover position. I’ m going to take a break for a while from the sim. And try againin a week or two. Maybe...

Did you use a flybar locking tool when you set up the head? I am asking because the only tool for this seems to be back-ordered by all suppliers of heli parts. I guess I’ll have to make one with plexiglass and two end bolts. Best of luck with your new purchase.

My apologies, just thought that maybe someone could help on this forum .

Thanks Tony, I will give it a try.

Has anyone who has used Phoenix 2.5 experienced probems in the “hover training” mode at 100%? It seems to super fast at that setting, way faster for me. to conquer after many hours of trying. I’m thinking this old simulator is faulty or maybe it’s just a it’s just too much for my 70 year old...

Tony, my Phoenix 2.5 is not loaded online on my laptop. I tried several times to load it online but it wouldn’t load-probably because my old laptop is 9 years old-but it does have Windows 7 and even so, a computer guru tried and he could only load it offline. Is there a way I could send you...

Hey guys, I'm a new guy to this hobby. I recently rebuilt a crashed trex 450 Plus given to me, along with a Dx6i and a PHOENIX 2.5 flight simulator. The rebuild is finished and I've spent many hours trying to learn to hover with the aforementioned simulator. I am having a very difficult time...

Merry Christmas to you Jim...fyi I always need more time on my simulator (PHOENIX 2.5) , I swear that simulator , when running on 100% real time is way, way faster than real time in the real world.

Thank you Geena, I'll check it out; can the flyer lock be found on Ebay?

Thanks Tony.

I have a Tarot 450 Sport V3 main rotorhead on my Align 450 Plus. The flybar is set-up according to Tony’s video- leveling it with the 2 links from the swashplate to the head. Servos are centered, servos’ links at 90 degrees and swashplate is level. When setting the pitch (-10 to +10) do I need...

Sorry guys, the second calibrarion was done in error. I laid the RC Logger down flat instead if standing it on its edge for the “06” calibration Dumb error on my part; maybe someone can use this info.

Recently purchased the RC Logger and after calibrating once, I tried to recalibrate it on a much more level surface vertical and horizontal). All went well until I got to “05” and when I placed it on the horizontal surface, it did not progress to “06”. Is there some procedure for resetting the...

Thank you Admiral, I used a wooden dowel to press out the one way bearing shaft and pressed it into the new gear hub; lined up the holes and all is good. Main shaft is new so everything fits as it should. Again, many thanks for your learned advice.

Hi everyone. Had a bad crash the other day and ruined my autorotation tail drive gear. Just received a new autorotation gear but need some information regarding removal of the one- way bearing shaft from the old hub or if it's easier just exchanging the old hub with the one-way bearing still in...