Search results

I fixed the problem. I removed the model from the tx, then set up a new model. everything works correctly.

The first thing I thought was a bad servo. So, I replaced all of the old DS410 with new DS415. Then I changed the 3gx. I left that part out.

I have a trex 450 sport v2 that I converted to flybarless about 1 1/2 years ago. I am using DX6I with a AR 115 rx and 3gx 3.1. This thing has never skipped a beat until last weekend. It was the last flight of the day, the wind was picking up and, I just got done with a roll when it kinda a...

I am converting an old 450 pro clone to flavorless. I am installing a 3gx mrs. When I set it up for model 450 pro, the throttle/pitch stick makes the swash move forward and back. The ele. makes the swash move up and down. When set up for model 250 it is ok. The servos are set the same. Can I...

Why is it that when you balance a low wing it is done upside down, when it flies right side up?

No, the manual doesn't even mention the lights. I tried one with a 3.7 v battery from a small heli, it worked but, when I tried the 11.1 that the plane will be using it smoked. I will be replacing them with 12 v lights from radio shack. This is a pretty cool plane. I am installing the flap...

rdsok, thanks for the help, I'll try it the way it is. It should fly as it is sitting a little nose heavy on the balancer. I will also check out 3D Hobby Shop.

rdsok, sorry, I didn't realize iI chopped off the bracket. I just wanted to make sure that I have this set right before the maiden flight. Like I said, setting it by the book will require more than 50 grams up front wich I feel is way too much.

there is a 2 gram difference. The 1500 is what I will run in it. But my initial question is should the c.g. be one third of wing chord ? If so, then the instructions that I downloaded from Aet-tec would be wrong at 2 1/2 " if the wing chord is 10.75 ".

It calls for a 1300 and I have a 1500.

Ok, so I am building a H.K. Yak 54, ( AKA Art tec yak 54 ) but, Hobby King does not have any instructions. I downloaded from art tec. The instructions state that the c.g. is 2 1/2 '' from leading edge. I was taught a long time ago that a rule of thumb is one third of chord length. This wing is...

Ok, so Santa left a Dynam T-28 under the tree. This plane comes with nav lights on the wing tips, and fuse, but no plugs on the wires. Any suggestions on how to wire without letting out any smoke ?

Ok, what is best for a trainer, high or low wing ? I have a HK Decathlon high wing, and I am having a hard time trying to get a stable landing approach. When I went through pilot training for a private pilot ticket, I trained in a Cherokee 140. I did not like the Cessna, It felt a little too...

Hey all, I am looking to buy another foamy, but do not like the color they offer. they also have ont that is un-finished. What kind of paint is safe to use on EPO foam ?

Is there a video for this ?

With a helical gear and pinion, can the pinion be changed from a 15t to a 12 t without a mesh problem ? I know that with a traditional set up it is ok. not sure with this set up.

So I measure the outside, then the shaft size, then the thickness ?

What is the proper way to measure a main shaft bearing ? I need to replace some that are just like those, but are much smaller. I have a digital caliper.

Thank's Tony.