Search results

I'll just play around with it and see what works. I'll let you know what I find out. Thanks.

After thinking more about the gyro sense page attached. Should I just INH this page and use my gear travel adjust page for controlling the gyro sense. Also how about throttle hold? My switch is INH at this time. Should I Activate it? Will it work as normal. I haven't tried it yet.

That's not what I'm doing on my other helis. I'll take a pic of my tranmiter page on my tranmiter soon as I can .

Ok, I'll post it when I get home.

I've got it plugged into gear channel. I have my transmitter imput select page set as follow. Aux2 ch input hold sw and gear act. If that makes sense. Every thing is as the micro beast manual says. In my transmitter under gyro sens I've got it set to auto, F.Mode Normal 0, Stnt 0 , Rate 0: 75%...

Well that did the trick on swash not traveling up an don't level. Moved the ball link out one hole on elevator and mad some minor changes to the control arms and it is now running true in positive and negative pitch now. So on to the next step of the programming. The only thing I'm thinking...

I'll give it a try and keep you posted.

Can you tell me how to post a video of what having a problem with.

I'll see what I can do.

I think that's what I've done. But it is still traveling up pitch and down pitch out of level.

I checked N and it is correct. I must be missing something. I've tried everything to zero my servos in the G position. I thought when you light up G the servos would go to there neutral position. Then when you move your Rudder stick to the side you could pick the servo that is off and adjust...

I'll take a look at it tonight and let you know.

G, swash is level. Servo arms centered as close as I can get them I adjusted servo rods to get swash level at midstick. Pitch and aileron servo are still not tracking in positive and negative throws. If I pop the ball links off, in the neg. Pitch links need shortened. But in the pos. Pitch they...

K, I'll give it a go. Let you know what happens.

I'm using the elevator stick to level the the swash. Not the control rods. My servos are as close to center as I can get them. So do I adjust the rods instead of using the elevator input on each sevo?

Ok, I went back to G and used a swash leveling tool I've used on my other Fly bar helis. With that said. I can get my servos level in there neutral state but when I switch off of G and go threw to the end where I have control of the pitch movement. My swash plate will not stay level on the...

I'm starting to understand how to move around in the micro beast menues so the next chance I get I'll go back threw it to see if I can get it closer. One step at a time. I've been real busy getting ready for Swapmeets I help with. I'll keep you informed on my progress.

Ok, here's what I figured out so far. Well you need a battery that's fully charged in order to get a solid bind. Duh! Starting to step threw micro beast set-up menu. Have a question about step G. Should I take the head off and use a swash leveling tool? And should step J read 0 pitch after you...

I'll give that a try tomorrow evening and get back with you.