Search results

Landing lights paired with landing gear. The gear are servo less electric. The lights are high intensity 3 watt powered by their own 2s battery, their own electronic control board and on off switch. The landing lights require a reverse input compared to the gear. Easy fix. Plug the light...

Been awhile . Here's the latest picture of the Wolf with the 203s dry fit. This particular 230s went to nest 40 feet up a 60 foot Maple June 12. I got it back Oct 1. It just needed a good clean up and a tail rotor. It's supposed to rain untill Tuesday night, so I should be able to get all the...

Thanks Tony

Finished up some inside work on the house Thursday. Friday was shopping day. Wanted to go flying today. Of course it's raining. Sunday, Monday and pssibly Tuesday. Should have went flying earlier in the week and started the indoor project today. I had a 230s, but it went to nest 40 feet up a...

Jimbo. Some body may have already told you this already: Swap any two wires on the motors and they will turn in the oposite direction. Don

Thanks Jim. I may just upgrade the 230s along with one of your suggestions. get used to flying it and then put in the wolf. Don

Jim, thanks for the input. If I have a problem, and by your experience, I will. Now you gave me a quick fix and I don't have to go nuts figuring it out. Don

Boogs, I'm going to use the Emax 30a. My post above explains some of my changes and reasons. I anticipate IU1 at 80% should work and that also gets rid of the control limitations of stability mode. If i run into overheating I'll look into more power. As you said "more power" and I say more...

Point taken. That's the reason for the two esc's. Both hooked in paralell to the 11.1 source. One is hooked as normal to the throttle port. The other has the positive and negative removed and plugged into the rudder channel and only supplies power to the tail motor as per 230s. The AR7200bx...

Jim. Now you tell me lol. I,m still learning to fly the 230s. Changes so far. Changing Rx to AR7200bx. I need a gear channel and the AR636 uses all it's 6 channels when you use panic recovery. Making my own esc out of 2 Emax 30a. The AR7200bx will not arm the stock esc. The esc's should be...

Not on the site. just go there to look at the kits and dream. Been flying RC fixed wing since 1968. Just got int heli 2016. When in the air I found that the heli flies much like a fixed wing. Hovering, a different fish. I've got it down to about four feet. So, I say I can control the 230s but...

Frank Thanks for the complement. But, Im not that Don. I'm just a good 'ol boy doing what I enjoy and enjoy what I'm doing. Don

Frank Go to Scaleflying.com They make 600 airwolf kit and you can buy a set of gear for around $70.00 usd. I'm working on a 25o size powered by my blade 230s. I have had to make my own retracts, the rocket pod and I've installed navigation and landing lights. I also have to make up the...