Search results

Ok thanks!!!

Your help is very much appreciated!!!this is gonna drive me drink,but hopefully we can make it work..i am sending pic from 7210 nitro setup ..

Ok will do.thanks for your help

Dx 18 has governor catagory in it.when sensor is plugged in to aux2/rpm and governor n radio on it shows up on monator screen and when flip switch it does move ..

No i did not.bad weather here so i can try friday..

When i turn gov off n 7210 throttle works good..i have st1 at 52 st 2 at 72 all work fine...set normal 0-25-50-75-100...

Ok tried 0 40 -40-40-40..it gave me full throttle at about 1/4 throttle..in normal mode..there must be a setting between throttle and gov that i am not aware of..

Ok your help is greatly appreciated..ar7210 has not much on utube..called horizon twice for help but no returned call..any info u can help would be great..

Jr vibe 50 ..os 50

Governor not on at below 25 is this correct??

Ok normal is 0. 25.50.75.100..i was using 52 to get 1700 rpm..

Also went to governor menu in ar7210 and turned gov on.set low and high throttle etc.what expert gov section apply to??

Tony i have dx18 and ar7210...i turned on governor n radio n-0 iu1 10 iu2 20..set throttle curve to normal linear iu1 52 straight across iu2 55 straight across.does this look good to you..pinion 11 teeth mg 87...

Thanks for your help.still a bit confused about throttle and when gov works..

Mine is set to fmode so 1 switch handles it..i have throttle set to 0 to disable gov in normal mode..throttle acts crazy but i figured out engine must be running to make it work..ie go to full throttle when off.when on throttle goes to rpm u set and stops ..

My gov setup in radio ..normal 0 st1 10 st2 20..sensor working ..throttle n linear st 1 55 across st2 60 across...throttle at 55 and gov 10 gives 1863 rpm..throttle at60 and gov 20 gives1989 rpm..does this seem correct to you..thanks

Tony,trying to setup ar7210 with nitro governor.i am using dx18..do i need to use governor menu in radio??.