Search results

My friend has one of those axial trucks he says his truck will go balls to the wall when not on ground ..soon as he puts it down goes about 5 feet. He is running NIMH which i have not for a while.... so im leaning toward battery any other thoughts?

Stunt mode or Idle up. Different rpms are used for different flight characteristics. For example higher head speed equals faster cyclic response. Collective Management is controlling the rpms through the pitch of the blades. Example you are in a maneuver that is fast flight and you want to...

Alright finally got it ....with this fc you have to use rx2 pad for spektrum.

I have reset to defaults and tried differnet uarts in betaflight. Evertime i hit save and try to move to a different tab i get the picture i linked

I have (data grey) on RC pad and red on 3v and grnd next to it. Binds to radio no problems. Just not being seen by FC. Tried enabling serial on Uart 2 and 4 independently. Ill have some screen shots up soon.

Board is Dalrc f405. Google Image Result for https://cdn.shopify.com/s/files/1/0948/3076/files/QQ_20180302122036.jpg?v=1520586156 Using the Spektrum SPM4648 with auto bind. I cannot get the reciever to communicate with FC. If some one would be so kind to explain exactly what pads I...

Yah if I spin the main gear I can generate a rpm in the software. I was considering doing the swap to a bigger washer only problem is they are thicker so less threads in aluminum.

Would you trust this. To get it that close had to drop it down where the top edge of carbon is blocking top hole of the mount.

Ok i was kinda leaning towards what you said.... just want to make sure. On the throttle curves im mostly trying to figure out what head speeds I should be running. Ikon govenor will set speed 1 at 25% flat speed 2 at 60% and speed 3 @ 65% the ikon will add powerlike a v curve at high...

Doing a (nitro) gov configuration for first time. The setup. Ikon2BT running a Futaba BlS272 for Throttle on a Synergy 556. While centered in Ikon software (no changes made + or -) mounted arms parallel to each other while 50% throttle shown in software and 1/2 throttle mark shown on carb...

I am at the final build stage of my new heli. I have my electronics installed or located where the will be installed and all wires routed. I am a little foggy on setup steps order.. For example I have an Ikon2 that will need to be updated and setup an esc that has to be programmed/ setup. I...

Will do..... the last one i popped in on the stream but was at work.

I would love to see some content about the differences in Governors i.e. using the ikon2 gov feature or just using the gov store on a Hobbywing esc. Setups walk throughs ect... I am about to go post up some questions on this exact topic.

I say hello! My name is Chris I live in Graham, WA Fly Helis mostly and dabble in fixed wing. Currently Im building a 500x and will be building a Devil 420 soon. Currently Flying a Eflite apprentice and a foamy from flighttest. Great info you guys got here and Tony the videos have been...