Search results

Yes all good . Spectrum DX 9 and i will use a spectrum compatible Rx. I did have to search for Tony's videos on setting up a ccpm again. Thank God he did a full explanation video, makes my job easier. Yes all good . Spectrum DX 9 and i will use a spectrum compatible Rx. I did have to search...

Thanks, that would explain why. I don't use futaba. I will change the Rx to spectrum. Easier for me.

Hello all, It's been a while. I am having problems linking my futaba R6106 to an align t6 transmitter. I turn on the tx and then the Rx, I then push the link button which is solid red. It's starts to flash then goes solid again and no n linking had occurred. Can anybody supply some ideas on...

Hello all, Does anyone know what the difference is in the number on the top of the Align heli motors? I have 2 motors with a different number L1227 and C1229 both are a RCM-BL600MX 510KV. I am about to swap out the C1229 on a 600 size heli and want to ensure they are the same. Darren

If I come across a rpm sensor I might try again on ikon, but for the moment happy flying the same way I have tuned all my other helis.

Well after plenty of time setting and resetting i must say i cant get used to the governor setting and have turned the esc back to fixed point and now running throttle curve on mode 1 0 to 60 flat ,, mode 2 92 flat line and 100 on mode 3 , much better response and head speed seems to be what i...

no there is no extra wire on mine.

Yes I considered it but don't have a rpm sensor so went to the esc settings

Well it flew in a hover and a few left and rights but not happy with the RPM way to low on all 3 settings Going to try 2000, 2100, 2200 see how those speeds go. What i did do was set the ikon as normal, then went into transmitter and lowered the throttle settings to 0 and went into castle esc...

Cheers Tony, have set it up, test fly tommorrow . Fingers crossed.

Hello all, I am setting up a governor on my castle ice2 HV 80 for an align 600. I would normally run what i call a poor man governor by adjusting throttle curve to flat 85 idle up 2 and idle up 2 flat line 95, seems to work ok I have been told less stress on the motor and batteries if i use...

yes you can set it up for training, it was easy after i did the firmware update on dx9

Hello thanks, I got it working the 6i binds to do 9 as a receiver works fine.

Hello, Thanks I can do that but the trouble is the transmitters won't bind to each other. Daza

Hello all, Want to set up a training transmitter with wireless from dx 9 to dx 6 i every time i try it said bind fail and the dx6i keeps binding but never connects. I tried with a black 6 and that said it connected but my 9 said fail and it would have no signal on master TX. i have tried a old...

Ok will pass it on and keep you updated, hopefully a fix. Daza

Thanks for the info , I will pass that information on . He is flying with reasonable new genace batteries , this happens straight after he had connected and has a small hover then pumps power it cuts out. If he puts around it's fine. Is that what happened to yours. Data