Search results

  1. C

    Eachine E010 Raffle Now Live!!! Enter NOW!!

    Cool Cool...I shared it out to my FB page.
  2. C

    Quad Derek's New ZMR250 FPV Racing Quad

    Derek I too had a Naze setup and this YAW problem. Can you see the solder points on the ESC's? Check them closely, in my case I had 2 of 4 new esc's that the solder on the positive terminals spilled over into the neighboring components. (it was globbed on) I ended up exchanging the escs. Had to...
  3. C

    Batteries Running LIPO's in Parallel

    Yea the Airframe should be fine. Yesterday as I was testing she didn't seem too heavy and in fact had plenty of punch. With what I have read and the research on this frame fully loaded with FPV gear and Gimbal/GoPro the suggested battery is a 6500. That would almost be like a brick riding on the...
  4. C

    Batteries Running LIPO's in Parallel

    RD I'm sorry I may have misrepresented my post. I plan on using both 35C's together as a set and both 45C's together as another set. Not mixing either of the C ratings. This is for a Hex build. The combined weight of the 2 1800's are still less than the original 4000mah batteries I want to...
  5. C

    Batteries Running LIPO's in Parallel

    RDSOK I have 4 batteries, 2-35C and 2-45C that were bought together when purchased. They (set) are the same age, they show 12.4/12.5 when fully charged. 90% of the time all of my 1800's show 12.4 when charged. However the (each cell charge) varies from 4.2 to 4.19 to 4.18 Also I have read they...
  6. C

    Batteries Running LIPO's in Parallel

    Tony? Long story short (reason for asking this that is) I know I can run LIPO's in Parallel to gain more MAH but I am reading that each pack must be (CLOSE) in VOLTAGE and C rating and size (EX: 2200mah) Now when they say "close in voltage" are they talking 12.4 volts or each individual...
  7. C

    Spektrum DX8...Dropping from the Sky. Please Help

    Yea all connections were fine previously and I could see that being the case on one quad but for it to happen on 2 different quads has me just scratching my head. As per the electrical...the only thing that is the same between the 2 quads other than the mentioned is the batteries. I have made...
  8. C

    Forum Timeout

    Tony I know it is either in here some where or covered some where but how can I keep the forum from timing out so quick. I can leave the page open and it seems 5 minutes later I have to log back in. No worries but just wanted to be sure I am not doing something wrong
  9. C

    Spektrum DX8...Dropping from the Sky. Please Help

    Hey Guys Within the last 2 weeks I have lost 2 quads for no obvious reason. 1st one I lost both FPV and RX within a split second. All I saw was the nose go straight up (without my help) and everything went dead. 2nd, yesterday same scenario, started getting FPV static, quad banked up and...
  10. C

    Setups GoPro/FPV/Aerial Video

    So with the GoPro I will see the FPV as it is normally via any monitor/goggle (static or not) yet the GoPro will record good video? Have you ever flown FPV with a GoPro? Is there much lag in signal? - - - Updated - - - Well the more I read the more I may choose not to... Lots of complaints...
  11. C

    Setups GoPro/FPV/Aerial Video

    Ok got a question to clear up my GoPro confusion Ok I am starting a Hex build to do some Aerial video and photos. It will have a gimbal that I will control from my DX8 and a guy at work has a Hero 3 I plan on buying. Now then I had plans on placing FPV equipment on this using a separate...
  12. C

    Quad 250 Quadcopter Complete Build Guide CC3D QAV Blackout Clone

    Rob As Tony mentioned on screw holes there are 2 sets of holes designed to accommodate different motors. I my last 3 builds I have had to open up the holes on every arm to make room for more than 2 screws. It's kind of nature of the beast with them depending on motors and manufacturer as well...
  13. C

    Setups Camera Wiring

    Thanks Eye
  14. C

    Setups Camera Wiring

    Ok I'm not real familiar with cameras that require alternative wiring so I need some knowledge. I want to purchased a FatShark transmitter but I want a CCD camera and really do not want to pay for a FatShark CCD camera that typically runs 70+ dollars. My research is showing me that most...
  15. C

    Chargers Need new Charger

    Ya know I still have the original charger I purchased with it. I may plug them into it just to see what happens. When I plugged the batteries into the iCharger it showed them having 6.5 volts left in them.
  16. C

    First post, maiden flight with Apprentice

    No sir...cincinnati ohio. I've been in NH but for business only back about 10 years ago.
  17. C

    First post, maiden flight with Apprentice

    DBell I could be wrong but I believe that in order to do a buddy option both TX's must be in the same Mode. The more experienced will chime in I am sure.
  18. C

    Chargers Need new Charger

    Ok. Now why do my lipos get so hot in the car and is that normal? One of my 2s are now kind of puffy. Like a gas build up inside. I was running a 1300 2s 25c lipo. Should I get a bigger battery for it?
  19. C

    Chargers Need new Charger

    Tony I pulled out some old nicad batteries and want to see if they will hold a charge. I see several options for doing so on the iCharger but what is the best way to do this
Top Bottom