Search results

I am amazed at the difference, still could never get a 6 degree on menu J but i did get a blue lite on 6.5 so i went with that...heli seems very stable...a friend of mine that has been flying for years...flybar helis only...has been helping me as much as he can....the 3gx actually was scarring...

OK guys after working the the ar7200bx (beastX) I will never use another FBL system...the BeastX FBL just plain works and is so stable i can almost sit my TX down and it would stay in a stable hover...this new setup is absolutely the best...Spektrum DX9 and the AR7200bx with remote receiver has...

I have the Trex 550E pro DFC (600 size if you ask me) I have the 730MX 850KV motor and I'm using the Castle Creation Talon 90 ESC http://www.castlecreations.com/products/talon.html and it preforms great no problems and it's a great balance for a great bang for your buck i would suggest the...

Velos Rotors 880 Electric Helicopter Kit ------ $1999 1x Flybarless unit with 4 servo swash plate support ------$210 1x Full range receiver 7ch or more --------- $150 1x RX battery or BEC ----- $21 4x Cyclic servos -------- $660 1x Rudder servo ------- $180 2x 700 class heli motors...

I want one http://www.helidirect.com/velos-rotors-880-electric-helicopter-kit.html

thanks tony i did watch those videos...i was looking for the mechanical type...like which links to adjust...i think i got it...i know i can't seem to get 6 degrees of pitch set in the 7200 i got a blue light at 7 degrees.....when setting up the 7200 all sticks should be at center from start to...

thanks guys i will give that a try

can someone point me in the direction for a proper head setup on a flybarless DFC setup with the ar7200

Ok the way im understanding this in menu G of the 7200 it is like the dir mode on the 3gx where you level your swash plate and make sure you have 0 pitch and you want all tx stick in the center as well..... my 7200 is in spot mode....i have notice that my rudder movement is very small amount...

Ok i have my ar7200bx and getting ready to set it up i'm stuck on the gyro gain what are the best settings to start with for head locking and rate mode.. I was told the following Rate mode 0-50% Head locking mode 51-100% if that's true what would be a good starting point for each... -...

yeah that thing is fun and the best thing is if you hit the wall and it lands upside down...you don't have to turn it over...it knows what is up and it will take off upside down and fly as if it was right side up..lol

Ok I have the ar7200bx and a satellite receiver was thinking of placing the satellite receiver on the left front of my 550 heli under the canopy it will be just in front of the motor and under the battery with the left antenna out in the air will that be ok...

So the way I'm getting it you don't have to have a external battery plugged in..you can plug straight from the esc with built in bec into the Throttle port and the ar7300bx will work like the 7200 am i understanding this right?

I have the next version of that..nano qx 3d it's a fun little quad here is the video of it https://www.youtube.com/watch?v=IkbrTSiQ5xA

I agree you will love the way the 550 flies, I have one and it flies very stable and smooth...till i got to brave and crashed it... will have it back up and flying this weekend....

Ok I was told that i did not have to setup my talon 90...but i noticed a lot of ppl talking about setting up the ESC should i be setting up my talon 90...and if so what should i be setting in it, i do have the software and usb plug for it...just never used it I have a Trex 550E Pro DFC...

I hope so i have heard nothing but good things about the ar7200bx and the BeastX as well i have a 3gx right now and it has a lots of settings and i noticed it can get touchy and you only have a few secs to set each flight mode settings...the 7200 seems to be a little for user friendly and i like...

Ok guy's i got lucky found a ar7200bx new for $149 on ebay

ok guys the new AR7300BX looks like it just replaced the 7200, my question is do you have to have a separate battery to power it or just the same as the 7200 and just plug in the esc in the throttle port i was wanting a AR7200BX don't want a used one and every where i go they have the ar7300bx I...

Tony along with what BBJ said I would also like to see a video on the fail safe in the DX9 and how to set that up and Tony your right that DX9 is an awesome Tx i will never again use any thing else again