Search results

Thanks for your input

A lot of the X2 parts Are interchangeable , I put a X2 tail assy. and Head assy. on it and they work great. You have to upgrade to the whole assy. and then parts are easy to find

I can not find a gear set for my DS610 servo, will a DS615 gear set work or is there any other replacement sets that will work other than the HSP61031 ,I think these have been discontinued and out of stock everywhere

I down loaded and installed version 2.1, It now says 2.1 on the program and said installed successful. I redid all the settings but the tail Delay still will only go down to 10, I try to very gently move the rudder stick but 10 is the lowest I can get, I flew it and it fly's the same as it was...

Thanks for your help, I will post the results when I get it up again

OK Thanks, I will reflash the unit, My program says it's 2.0 now so I will do 2.1 and see what it does.

sorry,I did'nt understand you before, So if the delay is not at 0 with a high speed servo it could cause my problem. Now I don't know haw to get 0. when I move the stick to decrease the Delay value the graph will only go to 10 before it changes light color and starts going back up,then when I go...

Thanks for trying but like I said I have the program and it will not go any lower than 10 ! My original question has still Not been answered , WHAT DOES THE DELAY DO !

Is the Delay what controls that ? I don't know what the Delay Does, I connected the heli to the computer and watched the settings and tried to set the Delay to 0 but under the Red light it will only go down to 10, I am running version 2.0 and I know I can up grade versions but this is my only...

what does the Delay do in the set up. all videos I've watched say to set the delay to 0 but the lowest mine will go is 10 , Does the Delay have anything to do with tail sensitivity , I have had other trex heli's and never had this problem

I set up my 450 trex but I don't know what setting Is used to desensitize the tail, while hovering If you barely touch the tail stick it rotates too quickly, I am a fairly new pilot and need to tame it some . I have the computer program but need to know what controls the piro rate

Ok,Thanks

I have a 200 hurricane and looking for parts, parts are easy to find for the x2 but not for the 200, I also have a stretched x4,A trex 500 ,A trex 600 and a trex 700 stretched to 800 so I'm not looking for another Heli but thanks anyway

Whats the difference beside the head assy. is stronger on the x2,are the parts interchangeable ?

I have a old virtual flybar system running version 3-Archer 3.6.16 can it be updated or just buy a new one, it still works good just wondering if it's possible

Yes, it is on the top and according to the flashes I think it's picking up satalites

I have a 450 flame wheel I built with a Naza lite controller and a DX8 radio, It flies ok but the GPS does not work at all, the gps came as a package with the controller and everything seems to be programmed correctly but the position hold and return home will not work. I have return home set as...

I'm down to 84 now and it fly's pretty good but the tail is not solid yet, It wants to drift a little bit but it is windy and I think a little more tuning it will be ok. Thank you to all that helped . What does the rudder Delay do?

I have the gains down to 95 and it is a lot better. It still gets a little funny ,not rock solid yet but going in the right direction, I'm going to keep trying with 4.0 for now but if all else fails I'll change to 2.1, my laptop is so slow it will take a hour to reload the firmware and I can't...

There is no cyclic gain adjustment , the ail. gain was real high so I set both pots to 105 and i'll try that,also the 3gx is running 4.0 not 3.1 and I did try compatability mode and no luck on my desktop. my laptop is windows 10 also but verrrry slooow. charging a battery and will try it now...