New Member

Z

zcarg66

New Member
Hey fellow flyers! New to this site, been flying now for about two years. Looks like a great site and hope to obtain lots of info. here.
 
Z

zcarg66

New Member
zcarg66 said:
Hey fellow flyers! New to this site, been flying now for about two years. Looks like a great site and hope to obtain lots of info. here.
Click to expand...

Hey Tony, here are my aircraft. Except for the T-Rex550, the others are a scratch build Delta wing and two E-Flite Apprentice fixed wing. One of them I camoflauged and installed Spektum servos and reciever ( due to an earlier crash).
View attachment 11878
View attachment 11879
View attachment 11880
View attachment 11881
View attachment 11882
View attachment 11883
View attachment 11884

- - - Updated - - -

I flew the Delta wing today for the first time. The D/R-expo settings were off, too much input. I ended up with a hard landing, prop first. Not used to this type of config. Also flew my Apprentice with "SAFE" technology. At about 150ft., I lost the "down" input with the elevatorand had minimal aileron input. I was able to limp the plane back to the ground. Not sure why this happened. Sometimes I feel half of my learning curb is with the DX-8.

- - - Updated - - -

I flew the Delta wing today for the first time. The D/R-expo settings were off, too much input. I ended up with a hard landing, prop first. Not used to this type of config. Also flew my Apprentice with "SAFE" technology. At about 150ft., I lost the "down" input with the elevatorand had minimal aileron input. I was able to limp the plane back to the ground. Not sure why this happened. Sometimes I feel half of my learning curb is with the DX-8.
 
You must log in or register to reply here.
Top Bottom