TAZ

T

TAZ

New Member
Hi fellow members,
I am getting into the rc heli flying.i have got KDS 450qs that my awsome wife bought for me.
i have recently encountered a problem i cant seem to fix.
symptom is heli wont stop spinning anti clockwise.
I have replaced the main rotor head.also replaced the giro with the FUTABA GY520.
Have mad sure all blades are rotating in correct direction.I can manually move rear blades to counter anti clockwise yaw but still wants to yaw.
What the hell.can some one give me some input.
 
T

TAZ

New Member
Thanks mate.i saw your location an thought cool,just down the road,sweet,but no you be in the states.
Can you help me with my heli problem ?
 
cml001

cml001

Well-Known Member
I can try.. If I can't this site is full of guys who know their stuff! Post your problem in the appropriate section and answers will poor in.
 
Lee

Lee

Well-Known Member
G'day Taz,
Guessing you're from Tazmania?
We can sure help you.
Just need to ask your question in the correct forum. Helicopter beginner forum will do it.
Then you'll get all the guys on here helping you out.
For starters, look at my video on Gyro/servo set up in the RC tips and Tricks playlist.
The Link is in the bottom of this post.
 
T

TAZ

New Member
Thanks barge,
no me not from tasmania but have been there once.just trying to find my way around this site.

- - - Updated - - -

Gday lee,
i have been to tasmania once an bloody nice place.trying to navigate around this site.never been on any forum before.just learning.
 
Tony

Tony

Staff member
Welcome to the forum TAZ! Forums can be as frustrating as helicopters when you are first getting started, but we are here to help. All you have to do is ask.

:welcome1:
 
Admiral

Admiral

Well-Known Member
Hi Taz, welcome to the forum, what changed before the problem happened? your problem is that the tail is not offsetting the rotor torque and that can be caused by several things Tail belt loose (not sure if it a TT Tail), belt twisted and tail rotor running backwards. A video may help us help you.
 
T

TAZ

New Member
Gday admiral,
couldn't say what happened before the problem.thats why i am perplexed.but yes the tail rotor is not offsetting the main rotor blades.i can manually move the tail blades for compensation but gets to full deflexion but still can't stop rotation.
 
You must log in or register to reply here.
Top Bottom