FBL Gyro Ikon2 Question

Applegate

New Member
HelloAll
I have recently set up two helicopters with the Ikon2 and have been flying them with good success. Now I want to activate the rescue feature. In the rescue page you can select which flight mode you want rescue active and I have set up the aux2 channel on a switch to activate rescue. In the on line videos I have found you were to set level on one of the setup pages. I can not find a place to do that in the latest software. Does the gyro set it’s own level on startup? And then go to that when rescue is activated? If so how do you deal with Helis that have a 5degree rake in the landing gear?Am I missing something?
 

Smoggie

Well-Known Member
Level calibrates on each startup. The angle of the heli doesn’t matter because the accelerometers in the 6 axis sensor detect the direction of gravitational force. gravity is always straight down regardless of how the heli is positioned.
 

Applegate

New Member
Level calibrates on each startup. The angle of the heli doesn’t matter because the accelerometers in the 6 axis sensor detect the direction of gravitational force. gravity is always straight down regardless of how the heli is positioned.
Thats awesome. Thanks a million for the quick response.
 
Top Bottom