FBL Gyro Ar7300 Bx

Tony

Staff member
I don't see why you wouldn't be able to. It's just 4 servos and an ESC. I'm not sure what servo plug are on the servos, so worse case you would need to replace the servo ends with good DuPont ends.
 
I don't see why you wouldn't be able to. It's just 4 servos and an ESC. I'm not sure what servo plug are on the servos, so worse case you would need to replace the servo ends with good DuPont ends.
I don't see why you wouldn't be able to. It's just 4 servos and an ESC. I'm not sure what servo plug are on the servos, so worse case you would need to replace the servo ends with good DuPont ends.
)k, thanks, now i hope that the Bx is easy to setup!
 

D.O.G.

Goblin 380 Supporter
The AR 7300BX is very easy to set up and they just work. I have 2 AR 7200BX and 1 AR 7300BX on my 500. The hardest part will be getting what I would like to call...the blue light special in menu "J" Lol. Trying to get 6 degrees and the blue light to light up at the same time. Just make sure you have 6 degrees and get as close as you can get to the blue light light up. Evrything is pretty much self explanatory :).
 

Tony

Staff member
Like Ivan said, the BX gyros are quite easy to setup. Spend extra time in G and get everything perfectly level and J should fall into place. If it doesn't and it's just a little off without the blue light, you can still fly, but definitely try to get a blue light.
 
Like Ivan said, the BX gyros are quite easy to setup. Spend extra time in G and get everything perfectly level and J should fall into place. If it doesn't and it's just a little off without the blue light, you can still fly, but definitely try to get a blue light.
Thanks a lot!:hdbng:
 
Top Bottom