1. If you would like to get rid of these banners and the ads within the posts, all you have to do is sign up and they will go away!
  2. Welcome to Rc-Help, are you here looking for the PDF Plans? They are located in the store in the tab above, but you must be signed in to access that part of the site. It only takes a second to sign up!
  3. Like Us On Facebook!
    Hello Guest, it occurred to us during that last server failure that we had no way of informing the members of the site of the failure and I would like to invite you to like us on facebook so that you can get updates if the site happens to go down again. We don't post much over there unless we are updating the members so we will not flood your feed like some places do. Just click on Like and then allow notifications and that's it. See you there soon!

    Click Here To Rc-Help's Facebook page!
    Dismiss Notice
Dismiss Notice
Hey Guest, I see you are not signed up on our forum yet. Did you know Registration is FREE and is only a couple clicks away? You can even sign in from Facebook, Twitter or Google+ for your convenience! So what are you waiting for, CLICK HERE to join in on the conversation!

Cars & Trucks

9116 12th Scale Truggy Diff Rebuild

Author Rating:
4.5/5,
The single worst thing about this truck is the horribly tight diff. I have 3 of these trucks now and every single one of them had a diff that would almost break the plastic dog bones if you tried to spin it. In this video I show you exactly how to go into the diff and free that sucker up! This will give you much more traction in the turns and an all around better bashing experience. If you would like to pick this truck up, click on the link below. 9116 1 / 12 Scale 2WD 2.4G 4 Channel RC...

How To Glue Rc Car Truck Tires

Author Rating:
5/5,
9116 Truggy - 9116 1/12 Scale 2WD 2.4G 4CH RC Monster Truck - RTR -$42.99 Online Shopping| GearBest.com If you guys remember when I did the review, my 3 complaints about this truck were the non oil filled shocks, which I replaced with oil filled shocks, the very tight and crunchy diff which I have since freed up and did a video on (click the "i" in the video) and the non foam filled tires. Today, we take care of the third issue! In this video, I show you how I glue up Rc car or truck...
It seems all we do now days is play with things that fly. Well, in this video, we get back to earth and play around with this little 1/12th scale Truggy. For a $33 vehicle, this thing is pretty sweet. Check out the product review video and let me know what you think! Once I get a track built, I will shoot some more video of it going around the track.
In this video, I show you how to completely tear down the engine out of your Traxxas T-Maxx. This is not as hard as some would like you to think. We start by pulling the engine out of the truck, followed by removing the ez start then removing the backplate, sleeve, piston & rod and crank after removing the clutch bell, clutch, and flywheel. And if you want to see a very nasty engine, this is it. This is NOT what you want your engine to look like. As always, if you have any questions,...
Here is the build of the Team Losi 22SCT. If you have any questions, all you have to do is ask. [MEDIA=youtube]id=Ufnrw_fKKs0;t=1[/MEDIA]
In this video, I go through installing all of the electronics in this truck. I really should have had a servo in this thing when I built it, it would have been a LOT easier. I did end up moving the ESC to the front of the truck rather than where I Had it mounted in this video. [MEDIA=youtube]lNzmoFPB17Y[/MEDIA]
You all have waited for this, and here it is. The Unboxing of the Team Losi 22 SCT (Short Course Truck) For a few years now, I have wanted to get back into racing. I had went to the local track (about 35 minutes from my house) a year or so ago and wanted to see about getting back into it. Well nothing panned out of that one and I never went back. But I did get some information. Seems that the SCT's were the hot ticket that everyone was running. I didn't like the SCT's, and I think that...
Building new shocks is a lot like rebuilding used shocks. Take your time, and you will get them correct every time! [MEDIA=youtube]YHG59zbcbZA[/MEDIA]
Here is the transmission build. Any questions just ask.
If you are looking to get into any hobby, most likely you are going to look for some good deals on used products. In this video, I show you what you are more than likely going to get. I purchased both of these trucks for a really good deal and I couldn't pass it up. Such a good deal as a matter of fact, that the issues I found when looking at them was not an issue. Take a look at the video to see what you could possibly get for a little amount of money on a used nitro truck. And...
It has been a long time coming, but the 2.5 Rebuild Series is finally here! There are thousands of people out there with these trucks and they are always asking how to do "this" or how to do "that" and in this series, I'm hoping to answer all of those questions in detail. I love getting the questions and answering them and when I can turn them into a video series, it makes it even better. In this series, we are going to be going through a Traxxas T-Maxx 2.5 that has, in the most literal...
FINALLY!!! All of the parts are clean and it is time to start putting things back In the last series, I had multiple people ask if I could show more detail, and that is exactly what I do in this video. Check Out The Tools I Used In This Video! Gold Drivers - US$21.28 4PCS HSS Titanium Black Hex Screw Driver Screwdrivers Repairing Hand Tool H1.5/2.0/2.5/3.0 RC Parts from Toys Hobbies and Robot on banggood.com Black Drivers - US$10.99 27% 7pcs 1.5/2/2.5/3/4/5.5mm Hexagonal Screwdriver Tool...
Installing servos into the Traxxas T-Maxx is pretty straight forward, but in this video, we are also going to wire manage this truck to make it as clean as possible! We get to do a little soldering as well. Crimping Tool [URL]https://amzn.to/2GR9v0Y[/URL] Dupont Ends [URL]https://amzn.to/2XUmrcs[/URL]
Loading...