We are finally to the part where we get to put the frame together. This is pretty easy, but as you will see in later videos, you must test the fit of the main bearing blocks. My main shaft was so tight that without any shims, the auto gear was not wanting to turn. I had to force the top block down, and the bottom block up just to get the head to spin free. Do this BEFORE you thread lock those blocks in place or you will play hell getting the screws out.

Everything in this video is pretty straight forward. The gyro mount fits great in the slots provided and there is NO play at all in it. Very secure and perfect for this gyro. I would suggest mounting the gyro in the bottom like this just for security. If you crash, it's protected on all sides from the impact. On the top, not so much.

Have a look and tell me what you think!

[video=youtube_share;i7sWGklsfm4]http://youtu.be/i7sWGklsfm4[/video]​