claytonbakerjr
Member
Hey all
Was looking over things and researching setup and such and then I noticed something.
Typically in my research I found that everyone plugs their motors into slot 1 thru 4 (quad copter)
In most everything I see slot one is at the top right hand set of pins on the board....
Now then I just so happen to flip the board over and see the number sequence is just the opposite...
What's up with that?
See Pics below....
![KK2.1.5 top.jpg KK2.1.5 top.jpg](https://www.rc-help.com/data/attachments/10/10137-2f66201d563d2ce0598618ad37e987ff.jpg)
![KK2.1.5 bottom.jpg KK2.1.5 bottom.jpg](https://www.rc-help.com/data/attachments/10/10138-108ccb9ad906fb94f6e0a854fef121ef.jpg)
![KK2.1.5 top.jpg KK2.1.5 top.jpg](https://www.rc-help.com/data/attachments/10/10137-2f66201d563d2ce0598618ad37e987ff.jpg)
![KK2.1.5 bottom.jpg KK2.1.5 bottom.jpg](https://www.rc-help.com/data/attachments/10/10138-108ccb9ad906fb94f6e0a854fef121ef.jpg)
Was looking over things and researching setup and such and then I noticed something.
Typically in my research I found that everyone plugs their motors into slot 1 thru 4 (quad copter)
In most everything I see slot one is at the top right hand set of pins on the board....
Now then I just so happen to flip the board over and see the number sequence is just the opposite...
What's up with that?
See Pics below....
![KK2.1.5 top.jpg KK2.1.5 top.jpg](https://www.rc-help.com/data/attachments/10/10137-2f66201d563d2ce0598618ad37e987ff.jpg)
![KK2.1.5 bottom.jpg KK2.1.5 bottom.jpg](https://www.rc-help.com/data/attachments/10/10138-108ccb9ad906fb94f6e0a854fef121ef.jpg)
![KK2.1.5 top.jpg KK2.1.5 top.jpg](https://www.rc-help.com/data/attachments/10/10137-2f66201d563d2ce0598618ad37e987ff.jpg)
![KK2.1.5 bottom.jpg KK2.1.5 bottom.jpg](https://www.rc-help.com/data/attachments/10/10138-108ccb9ad906fb94f6e0a854fef121ef.jpg)