Published on 09-06-2013 15:52
Number of Views: 4407
In this video, i will show you how to mount your 3GX gyro as well as how to wire it up with or without a Rx attached to it. For you 6ch guys and gals out there, you MUST use the included wires with a 6ch Rx in order to make the rudder gain adjustment work. For you 7+ channel peeps, channel 7 is your rudder gain,
Published on 09-06-2013 15:55
Number of Views: 2446
In this video, I walk you through the DIR setup mode on the gyro. In this mode, you will set all of your blade pitches including cyclic and collective. Please note, you MUST use 8º of cyclic in this step! If you require more than 8º when flying, you will make those adjustments in the Flight Mode Settings in a later video.
Published on 09-06-2013 16:04
Number of Views: 1549
In this video, I show you how to go into the gyro and adjust the flight mode settings. There are 5 different settings in this, but some combine cyclic and collective, and others combine aileron and elevator. Watch the video below to learn how to adjust each one.
If you are out at this field, and lets say your
Published on 09-06-2013 16:11
Number of Views: 2236
As with the last video, this video is all about Flight Mode Settings. In this video however, you are able to fine tune your settings that you put in the gyro. Have a watch and let us know if there is anything we can help you with!
In this video, I show you just how easy it is to flash CleanFlight on your CC3D Flight Controller. The first thing you need to do is download the OpenPilot GCS and download the Cleanflight.cc3d.bin file which are linked below. Once you have those, you need to go into your Google Chrome Web Store and download the Cleanflight-Configurator. I have linked the Configurator below... read more
In this article, I'm hoping to explain what PID is, what it is used for and how to tune it. PID has become a way of life for the RC Industry, especially with quadcopters. So what is PID?
First, lets break it down into each letter...
P - Proportional (Kp). This is the gain that corrects what has already happened. Using a quad as an example, lets say the quad is at a 45º angle, and it wants an angle of 0º or flat. The Proportional gain is going to sense thequad is
As ou all know, I lost my Mobius in a crash that killed the board and Jason over at Banggood suggested this camera to replace it. In the video below, you will see what I think about this camera. ... read more
I decided to go ahead and put both of these videos in the same thread since they are virtually the same. The only difference between the two is the DX400 is 100w more power and the DX400 has an extra 2.4a USB port. The lack of voltage still worries me a little bit though but not enough to keep me from using them with electronics... read more